656023
6
Verklein
Vergroot
Pagina terug
1/7
Pagina verder
- 21 - - 22 -
To avoid overheating or deteriorating the flash head, the over-temperature protection
function will be activated automatically after 10 continuous high-speed flashes and the
recycle time becomes 10s longer.
8. LED Light Control
Press the LED Light Control Button (14) to control LED light: Off30%70%100%
Off……
When the LED light is turned on, the icon is shown on the LCD display.
Protection Function
Over-Temperature Protection
To avoid overheating and deteriorating the flash head, do not fire more than 40
continuous flashes in fast succession at 1/1 full power. After 40 continuous flashes, allow a
rest time of at least 10 minutes.
If you fire more than 40 continuous flashes and then fire more flashes in short intervals,
the inner over-temperature protection function may be activated and make the recycling
time about 10 to 15 seconds. If this occurs, allow a rest time of about 10 minutes, and the
flash unit will then return to normal.
When the over-temperature protection is started, is shown on the LCD display.
Number of flashes that will activate over-temperature protection:
Power Output Level
1/1
1/2+0.7
1/2+0.3
1/2
1/4(+0.3/+0.7)
1/8(+0.3/+0.7)
1/16(+0.3/+0.7)
1/32(+0.3/+0.7)
1/64(+0.3/+0.7)
1/128(+0.3/+0.7)
Number of Flashes (Approx.)
40
60
80
100
200
300
400
400
500
500
Power Output Level
1/1
1/2
1/4
1/8
1/16
1/32
Number of Flashes (Approx.)
10
15
20
30
40
50
Number of flashes that will activate over-temperature protection in high-speed sync
triggering mode:
7. Hi-Speed Sync Triggering
To enter mode, press both Mode Selection Button (16) and LED Light Control Button(14).
Press Mode Selection Button (16) again to exit mode.
In hi-speed sync triggering mode, you can use a hi-speed sync trigger to have your flash
unit synchronize with all shutter speeds of cameras(max. 1/8000 second, up to your
camera). This is convenient when you want to use aperture- priority for fill-flash portraits.
Note:
Hi-speed sync triggering mode is effective only when the flash unit is used together with
hi-speed sync trigger, e.g., Godox Cells II transceiver.
Hi-speed sync triggering mode is not available when the flash unit is mounted onto the
camera hotshoe.
Step
100%
70%
30%
Time of Auto off
5 min.
10 min.
15 min.
9. Buzz Function
The buzz function can be controlled by pressing BUZZ Button (15).
When the buzzer is turned on, is shown on the LCD display.
10. Wireless Control Function
The flash unit is built in with a Wireless Control Port (9) so that you can wirelessly control
the on-and-off of your flash, modeling lamp and buzzer, as well as adjust the flash output
level, etc.
To control the flash wirelessly, you need a Godox FT series remote control set (on-
camera and on-flash transceiver). Insert its receive end into the Wireless Control Port (9)
on the flash and insert the transmit end into the camera hot shoe. Settings made on the
hotshoe-mounted transceiver and receive ends will be wirelessly communicated to the
flash. Then you can press the camera shutter-release button to trigger the flash.
For full instructions on the use of FT series remote control, see its user manual.
When the flash unit receives wireless signals, is shown on the LCD display.
11. Sync Triggering
The Sync Cord Jack (10) is a Φ3.5mm plug. Insert a trigger plug here and the flash will be
fired synchronously with the camera shutter.
12. PC Sync Triggering
Insert one end of a PC sync cable into the PC Sync Socket (11) of the flash unit and the
other end into the PC Sync Socket on the camera. The flash unit will fire when the camera’s
shutter-release button is pressed.
6

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Godox AR400 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Godox AR400 in de taal/talen: Engels als bijlage per email.

De handleiding is 1,02 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info