669682
24
Verklein
Vergroot
Pagina terug
1/25
Pagina verder
46 47
MY GOPRO WON’T POWER ON
Make sure the camera’s battery is charged or the array is connected to an
external power supply.
OMNI UNEXPECTEDLY POWERS OFF
Omni might unexpectedly power off for a number of reasons:
Insufficient power to the array from an external power supply
Insufficient power to the array from the camera batteries
Insufficient, incorrect, or excessive voltage/amperage from an external
power supply
Missing camera from the array
Camera without array camera firmware
Fully depleted or nearly depleted camera battery
Full microSD cards (no action was taken when SD CARD FULL message
appeared on a camera)
CAMERAS IN OMNI WON’T RECORD
Check the cameras for errors:
If the primary camera has a problem, the camera status screen
displays a message describing the problem. For more information,
see Important Messages (page 44).
If one of the secondary cameras has a problem, the primary camera
displays Array Error and the camera status light on the primary camera
flashes rapidly. For more information, see Array Error (page 44).
MY OMNI ISN’T BEHAVING AS EXPECTED
This issue is often caused by switching from one power source to another
when the camera is powered on. To switch from camera batteries to
external power (or external power to batteries), you must first power off
the camera.
Omni takes a moment to recognize the external voltage being supplied.
Without camera batteries installed, Omni might not respond to a
rapid attempt to power up, if the external power supply was not
yet recognized.
With camera batteries, a rapid power up might lead to the camera
batteries initially powering up the Omni and then switching over to the
external power.
To prevent these situations, wait a moment after connecting the external
power before powering up Omni.
Note: When camera batteries are installed, check the camera status lights to determine
if the external power is recognized. Unless the camera batteries are fully charged, the
status lights illuminate after the external power is recognized.
MY GOPRO WON’T RESPOND WHEN I PRESS A BUTTON
Press and hold the
Power/Mode button [
] for 8 seconds to reset your
camera. This reset saves all of your content and settings, and powers off
your camera.
I WANT TO RESET MY GOPRO SETTINGS TO THE DEFAULTS
In Setup mode, select Camera Reset, and then select Reset Defaults.
This option does not reset the Date/Time.
I POWERED OFF MY GOPRO, BUT THE BLUE LIGHT IS
STILL BLINKING
The blue light indicates that Wireless is on. To turn off Wireless, go to
Setup mode. Press the Shutter/Select button [
] to select Wirleless,
then press it again to turn Wireless off.
For more answers to commonly asked questions, see
gopro.com/help.
TROUBLESHOOTING TROUBLESHOOTING
24

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw GoPro Omni bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van GoPro Omni in de taal/talen: Engels als bijlage per email.

De handleiding is 0,8 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van GoPro Omni

GoPro Omni Gebruiksaanwijzing - Deutsch - 27 pagina's

GoPro Omni Gebruiksaanwijzing - Français - 27 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info