479858
2
Verklein
Vergroot
Pagina terug
1/8
Pagina verder
DESCRPTION OF THE ALARM
Below are described the alarm module fuctions:
! System arming and disarming by a transmitters with random rolling code.
! Passive arming function (programmable).
! Blinker.
! Chirp (programmable).
! Perimetric protection.
! Volumetric protection (combined with an ultrasonic or hyperfrequency
module, excludable from arming).
! Control for CDL, electrical widows and sun roof.
! Electrical engine immobilizer.
! Alarm memory indicated by optic/acousticl signals.
! “PANIC” or “CAR-FINDER” function.
! Emergency disarming by means of PIN-CODE.
! Anti-hijacking function.
! Garage function.
NOTE: indications included in this manual, refer to the most complete device
of the 7563 alarm series.
OPERATING DESCRIPTION
COMPLETE ALARM ARMING
The alarm can be activated by pressing key 1 on the remote or by inserting the
electronic key into the appropriate socket.
The operation is confirmed by an acoustic signal and a visual signal consisting
of one flash of the turn indicators lasting approximately one second.
! Turn the ignition key to “ON” position
! The status will stay on for 0,5 seconds. During this time, push the button
N°2 of the transmitter.
! Go away from the vehicle and push the button N°1 of the transmitter.
!
Dear Customer, we invite you to read completely this manual, in order to
understand well how the alarm works, and how to program easily the functions
by remote control.
The alarm has a 45” pre-arming “neutral time”.
During the first 25” of this time, it is possible to exclude the sensor, as described
in the specific paragraph.
ARMING WITH SIREN SOUND EXCLUSION
This function allows the user to arm the alarm system, excluding the siren
sound in case of a theft attempt.
To exclude the siren, proceed as follows:
The alarm will be armed with the optical and acoustic signals, which, as
previously described, will be not activated in case of a theft attempt.
NOTE: the siren sound exclusion is bound to the single arming cycle.
This function is applied close to the hospitals.
ARMING WITH
After this procedure a single short flashing of turn signals will take place.
is bound to the single arming cycle
NOTE: You can cut off the alarm cycle without deactivating the system by
pressing key 2 on the remote.
(pag.12).
VOLUMETRIC PROTECTION EXCLUSION AND
COMFORT FUNCTION
This function allows the user to arm the system, with volumetric protection and
of the comfort function being excluded.
Push the button N°1 of the transmitter and, during the 25” of the neutral time,
push the button N°2 of the transmitter.
NOTE: the procedure described above .
SYSTEM ARMED
After the inhibit time (about 45 sec.), the system is armed and it is ready to
detect any theft attempt.
When the system is properly armed, the LED blinks.
After disarming the system, any occured attempt will be indicated by the alarm
with visual/acoustic signalling.
ALARM, HINIBIT TIME AND ALARM CYCLES
As previously described, any occured attempt will be indicated by the alarm
with visual/acoustic signalling.
After the alarm triggering, before another alarm cause, there are 5 seconds of
“neutral time”, that allow to disarm the system by emergency pin-code.
The alarm signalling has 5 cycles of 30 seconds each for input and arming
cycles.
The ignition key (+15/54) and the cut wire alarm signalling have no limitation.
ALARM DISARMING
The alarm system can be deactivated by pressing key 1 on the remote, or by
inserting the electronic key into the appropriate receptacle.
Disarming is indicated by three turn signal flashes and three acoustic signals.
If an alarm condition has occurred, it will be signalled by five turn signal flashes
and five acoustic signals (if these functions have not been excluded in
programming stage).
See next paragraph for all signalling.
EMERGECY DISARMING BY PIN-CODE
The alarm system being described here has a RELEASE PIN-CODE function
which allows the user to turn off the protection device (alarm and/or engine
immobilizer) if supplied remotes do not work or have been lost.
The foreseen PIN-CODE is composed of four digits, from of 1 to 9.
The manufacturer's setting is 1-1-1-1 and are the same in all the alarm
system 7563.
Due to brevious safety reasons, we reccomend to replace this original
code with another users customized code.
Please see at the relative paragraph for pin-code programming
PAG. 2
PAG. 3
UK
2

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Gemini 7563 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Gemini 7563 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,27 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info