42357
5
Verklein
Vergroot
Pagina terug
1/5
Pagina verder
DESCRIPTION OF THE 7059 MODULE (K2 models).
GEMINI 7059 protects the vehicle detecting attempts to break into the passenger’s compartment by
the emission of an electromagnetic field (frequency = 2,45 GHz).
The working of the sensor is based on the reflection of the electromagnetic waves when an object,
made of a conductive material (metal or body), is located on the field.
The measurement of the reflected waves detects the intrusion and then triggers the alarm system connected
to the sensor.
The sensor Gemini 7059 is insensitive to air movements (wind, thermal air drift, etc.), for this reason
it’s suitable to be fitted on pick-up vehicles, convertible cars and vehicle equipped by a sliding sunroof.
Due to the fact that the insulating materials are transparent to the electromagnetic waves it’s possible
to fit the sensor module in a hidden position, e.g. under the passengers compartment carpet.
FITTING INSTRUCTIONS.
Install the sensor in the best fitting position depending on the vehicle model.
It is important to underline that, the complete protection of the vehicle passenger’s compartment
cannot be obtained using a high-frequency sensor.
Adjust the sensitivity in order to avoid false alarm triggering, due to moving objects outside the vehicle
(people, vehicles or motorbikes). To prevent false alarm triggering it is necessary to avoid fixing the
sensor under the glove box or near the coin holders and metal moving objects in the passenger’s
compartment. Install the sensor Gemini 7059 under the covering of the rear seat (turned to front side
of the vehicle), under the dashboard or next to the roof light (under the covering of the vehicle roof).
ELECTRIC CONNECTIONS.
Use the connector supplied for the connection to the alarm system.
SENSITIVITY ADJUSTMENT.
The sensor 7059 is supplied with a Trimmer to adjust the sensitivity from a Minimum value (not zero) to
a Maximum value and a Red LED which lights fix for 4 seconds at each detection of the module.
(NOTE: between an alarm condition and the following there is a delay time of 4 seconds).
Adjustment procedure:
1) Set the adjustment TRIMMER to the MAXIMUM value (fully clockwise).
2) Close all doors, windows, boot /bonnet and arm the alarm unit. Wait till the end of the arming
delay time or set the DIAGNOSTIC function.
3) Move the hands near the windows (lateral, front and rear) to verify that the sensor 7059 does not
trigger the alarm.
4) If the alarm triggers, adjust the sensitivity turning the Trimmer anti- clockwise and repeat the
operation from point 3.
5) If the test is positive (without alarm triggering while moving the hands near the windows), disarm
the alarm unit and open one of the front windows.
6) Arm the alarm unit again or set on the DIAGNOSTIC MODE verifying that moving an arm inside
the passenger’s compartment will trigger the alarm.
TECHNICAL DATA.
EM Field Frequency 2,45GHz ±2,45MHz
Operating Temperature -40°C ÷ +85°C
Alarm Triggering pulse Negative 4 sec.
Operating Power Supply 10 ÷ 15VDC
Current Consumption 5mA
This device is guaranteed against construction or working faults for 24 months from purchase date.
The manufacturer declines every responsibility for any possible defect or failure to the device and to
the vehicle’s electric system due to incorrect installation or to the alteration of the indicated Technical
Features.
Pink
Brown
Green /black
Ultrasonic
White
Conne
T
R
7
0
5
9
Alarm Triggering LED
Sensitivity Adjustment
AMP Connector
7059
7059 Sensor - Fitting Positions
NOTE : the sensor module must be fitted in a central position with
the TOP side (TRIMMER and LED side) turned on the internal of the
passengers compartment.
on the car
TECHNICAL DATA
Working Voltage 9÷16VDC
Current absorption 2,5 mA
Working temperature -30°C +85°C
5

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Gemini-7462

Zoeken resetten

  • Er zit een Gemini alarm in mijn auto, maar dat ding verstoort het elektrische systeem. De auto doet het dus niet. Dat alarm moet er uit en ik moet weten hoe het er in zit. Als ik daarvoor naar een garage moet ben ik nog meer geld aan dat ding kwijt. Gesteld op 8-7-2011 om 10:51

    Reageer op deze vraag Misbruik melden
    • Hallo heeft u ondertussen al iemand gevonden die u kan helpen. Ik heb hetzelfde probleem.
      Mijn auto start ineens niet meer. Alarm kastje nu in mijn hand maar nog geen effect.
      vriendelijke groet,
      pceresa72@gmail.com Geantwoord op 6-8-2011 om 11:40

      Waardeer dit antwoord Misbruik melden
  • heeft iemand een handleiding voor de inbouw van een gemini 7462 en voor een 2344 en een 5123
    ik wil dit in een kangoo uit 2003 bouwen

    alvast bedankt

    vrgr Gesteld op 7-6-2010 om 13:37

    Reageer op deze vraag Misbruik melden

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Gemini 7462 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Gemini 7462 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,19 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info