479874
2
Verklein
Vergroot
Pagina terug
1/9
Pagina verder
DESCRIPTION
GEMINI 7090
The system 7090 is an alarm system with sensors, which can be installed on cars with 12 volts battery (negative earth).
FUNCTIONS
- Remote controlled modular alarm with dynamic code.
- Blinker, universal central door locking control, electric windows and sunroof closure for selected vehicles
equipped with “Pack Comfort” system.
- Perimetric and volumetric protection.
- Controls for self-powered and additional siren (continuous or alternate sound).
- LED’s Memory, acoustic arming and disarming (through siren or horn).
- Remote controlled panic function and/or boot opening.
- Electric engine immobilisation.
- Alarm unit functions programmable through the transmitter.
The unit is equipped with two 2-channel transmitters (art. 7208E, frequency 433.92 Mhz) and two electronic keys
(CDE2).
Gemini 7090W
The system 7090W has the same functions of the 7090 but without the electronic keys and the receptacle.
USEFUL SUGGESTIONS FOR THE INSTALLATION
- Connect the positive and negative feeding wire of the alarm system to the battery.
- Connect always the alarm Green-Brown wire to the door pin switch.
- On catalysed vehicles the engine immobilisation must be carried out on the fuel pump and the starter motor.
- Avoid routing connection wires next to interference sources.
- The ultrasonic heads must be positioned at the top of each windscreen pillar and must be pointing at each
opposite diagonal corner away from the facia outlets.
WIRING CONNECTIONS
Disconnect the negative terminal of the battery and only re-connect after the installation is complete.
FUNCTION WIRE COLOR
Earth ðð BROWN
Battery positive terminal ðð RED
Engine immobilisation (max. 10 A) ðð 2 X GREY
Ignition live ðð YELLOW
Direction indicator lights ðð 2 x ORANGE
Door pin switch ðð GREEN-BROWN
Boot/bonnet pin switches ðð GREEN
Positive alarm armed ðð PINK
External sensors inlet ðð GREEN-BLACK
Self-powered siren control ðð BLUE
Additional siren negative control or klaxon ðð YELLOW-BLACK
Comfort positive ðð RED-BLACK
Comfort negative ðð WHITE-BLACK
Central door locking ðð
YELLOW-BLUE, RED-BLUE, YELLOW-GREY,
RED-GREY, YELLOW-BROWN, RED-BROWN
Note: The wiring harness has 3 connectors: connect the two 2-pin connectors to the receptacle of the
electronic key (art. 2390) and the connector with the thermal yellow sheath to the immobiliser. In the
7090W there are two connectors. One 2-pin connector to connect to the LED, the connector with the
thermal Yellow sheath to an immobiliser.
Table of programmable functions through the two-channels transmitter.
ACTIONS ALARM CONDITION VISIBLE
ACTIONS
LED FLASHING AND
SELECTED FUNCTIONS
ALTERNATIV
EACTIONS
POWER OFF Alarm OFF - - -
Turn the ignition
key to ON
Alarm OFF
-
-
-
FEED THE UNIT
7090
Alarm ON - - -
Push on the
transmitter 1 button
within 10 seconds
Access to the Set-up 1
function: Supplementary siren
One blinker
flashing
One flashing = continuous
Two flashing = intermittent
Push on the
transmitter 1 button
Access to the Set-up 2
function : acoustic signalling
with supplementary siren
Two blinker
flashing
One flashing = de-activated
Two flashing = activated
Push on the
transmitter 1 button
Access to the Set-up 3
function: Panic and additional
siren or boot opening through
the transmitter
Three blinker
flashing
One flashing = Panic and
additional siren
Two flashing = Boot opening
Push on the
transmitter 1 button
Access to the Set-up 4
function: boot opening while
alarm armed
Four blinker
flashing
One flashing =
While alarm disarmed
Two flashing =
For both functions
Push on the
transmitter 1 button
Access to the Set-up 5
function: vehicle check while
arming the system
Five blinker
flashing
One flashing = de-activated
Two flashing = activated
Push on the
transmitter 1 button
Access to the Set-up 6
function: closure control period
Six blinker
flashing
One flashing = 0,5 seconds
Two flashing = 6 seconds
Push on the
transmitter 1 button
Set-up function 7 function:
Passive arming
Seven blinker
flashing
One flashing = de-activated
Two flashing = activated
Push on the
transmitter 1 button
Set-up 8 functi voltage drop
sensor
Eight blinker
flashing
One flashing = de-activated
Two flashing = activated
Press the
transmitter 2
button to
change the
selected
option.
De-activate
+15 to
memorise the
selected
options and to
exit from User
set-up.
Turn the ignition
key to OFF
Set-up exit, normal working
of the alarm
- - -
Recapitulatory table of the programmable functions through the
two-channels transmitter.
Function Manufacturer
function
Programmable
function
1 Additional siren outlet Continuous sound Alternate sound
2 Acoustic signalling De -activated Activated
3 Boot opening with alarm disarmed De -activated Activated
4 Boot opening with alarm armed De -activated Activated
5 Vehicle’s check De -activated Activated
6 Central door locking period 0,5 seconds 6 seconds
7 Passive arming De -activated Activated
8 Voltage drop sensor De -activated Activated
2

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Gemini 7090 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Gemini 7090 in de taal/talen: Engels als bijlage per email.

De handleiding is 1,94 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info