761806
1
Verklein
Vergroot
Pagina terug
1/2
Pagina verder
1 2 3 4
QUICK USER GUIDE
Base
Handset
Connection base
!!! Please refer to our website: www.geemarc.com for an
up to date user guide, as there may be important
updates and changes you need to be aware of !!!
PACKAGE CONTENTS
1 Telephone base, 1 cordless Handset, 1 power adapter, 1
Telephone line cord, 1 NiMh battery pack ,1 Quick user guide.
INSTALLATION
Connecting the telephone
Connect the telephone cable to the telephone line socket (A)
and to the telephone wall socket (B).
Connect the power adapter jack to the base (and DC charger)
(C) then connect the power adapter plug in mains power (D).
Note: Use only the power adapters supplied with the phone.
Connecting the battery
Plug the battery connector securely
into the socket inside the handset
battery compartment.
Insert the supplied battery as
indicated.
Align the cover flat against the
battery compartment, and then slide it upwards until it clicks
into place.
Charging the batteries
Charge the batteries for at least 16 hours when charging for
the first time.
OVERVIEW
Base
1. /HANDSET LOCATOR
While the phone is idle, press to page all handsets.
2. IN USE
ON when handsets are in use, or when the answering system
is answering an incoming call.
ON when a handset is being registered.
Flashes when there is an incoming call or when handsets are
being deregistered.
3. PICTURE BUTTONS
10 big picture memory buttons for storing numbers to or dial.
4. FLASH / PROG
On line: Press the key to make a recall.
In idle mode: Press this key to program the picture memory
buttons.
5. MICROPHONE
6. SPEAKER MODE INDICATOR
On when the speaker is on.
7. SPEAKERPHONE KEY
NOTE: wait 2 seconds before to dialling the phone number.
8. VOL ( )
During speaker mode, press to decrease the speaker volume.
While in idle mode, press to decrease the base ringer volume.
9. VOL ( )
While in idle mode, press to increase the base ringer volume.
During speaker mode, press to increase the speaker volume.
Handset
10. EARPIECE
11. LCD DISPLAY
12. CHARGE LIGHT ( )
Steadily on when the handset is charging in the charger.
13. MENU/OK ( )
In idle mode: Press to access the main menu.
In sub-menu mode: Press to confirm the selection.
During a call: Press to access Intercom / Phonebook / Redial
list / Call list.
14. UP/CALL LIST ( )
In idle mode: Press to access the call list.
In menu mode: Press to scroll up the menu items.
In phonebook list/redial list/call list: Press to scroll up the list.
In editing mode: Press to move the cursor one character to
the left.
During a call: Press to increase the listening volume.
During ringing: Press to increase the ringer volume.
15. TALK ON ( )
In idle/pre-dial mode: Press to make a call in earpiece mode.
In phonebook/redial list/call list: Press to make a call to the
selected entry in the list in earpiece mode.
During ringing: Press to answer a call in earpiece mode.
16. DOWN/REDIAL LIST ( )
In idle mode: Press to access the redial list.
In menu mode: Press to scroll down the menu items.
In phonebook list/redial list/call list: Press to scroll down
the list.
In editing mode: Press to move the cursor one character to
the right.
During a call: Press to decrease the listening volume.
During ringing: Press to decrease the ringer volume.
17. SPEAKERPHONE ( )
In idle/pre-dial mode: Press to make a call in speakerphone
mode. Press again to switch to earpiece mode.
In phonebook list/redial list/call list: Press to make a call to
the selected entry in the list in speakerphone mode. Press
again to switch to earpiece mode.
During ringing: Press to answer a call in speakerphone mode.
Press again to switch to earpiece mode.
18. MICROPHONE
19. VOLUME BOOST ( )
During a call: Press to activate/deactivate the VOLUME
BOOST function.
20. CANCEL/MUTE ( )
In main menu mode: Press to go back to idle screen.
In sub-menu mode: Press to go back to previous menu.
In sub-menu mode: Press and hold to go back to idle screen.
In editing/pre-dial mode: Press to delete a character/digit.
In editing/pre-dial mode: Press and hold to delete all the
characters/digits.
During a call: Press to mute/resume the microphone.
During ringing: Press to silence the handset ringer.
In idle mode: Press to intercom another handset.
21. TALK OFF ( )
During a call: Press to end a call and go back to idle screen.
In menu/editing mode: Press to go back to previous menu.
In menu/editing mode: Press and hold to go back to idle
screen.
In idle mode: Press and hold to power off the handset.
Press and hold to power on when it is off.
22. ALPHANUMERIC KEYPAD, STAR ( ), HASH ( )
In predial or editing mode: Press to insert a digit / character
/ / .
key in idle mode: Press and hold to enable or disable
the keypad lock.
key in idle mode: Press and hold to turn on/off the ringer.
0 key in idle/pre-dial mode/number editing mode: Press
and hold to insert a pause.
23. R
During a call: Press to answer a new call if you subscribed to
Call Waiting service from your service provider.
24. PHONEBOOK ( )
In idle mode: Press to access the phonebook.
MENU SETTING
The phone settings are always set in the same manner:
Press Menu/OK button to open the main menu. Then
use the ▼▲buttons to select an entry and confirm it by
pressing the Menu/OK button.
The factory preset PIN code is 0000
Example: Set the language on the handset
Press MENU / OK , then select ▼▲HS settings, press
MENU / OK , then select ▼▲language, press MENU /
OK , than select ▼▲desired language and then press
MENU / OK to confirm.
Handset
PHONEBOOK
VIEW LIST
under an entry: ►ADD ►VIEW ►EDIT ►DELETE
►DELETE ALL ►PB STATUS ►FASTDIAL
CALL LIST
VIEW LIST
under an entry: ►ADD TO PB ►DELETE ►DELETE ALL
►DETAILS ►CATEGORY
BS SETTINGS
►BS RINGER ►RING VOLUME ►DELETE HS ►DIAL
MODE ►FLASH TIME ►CHANGE PIN
HS SETTINGS
►RING SETUP ►TONE SETUP ►SELECT BASE
►LANGUAGE ►RENAME HS ►HS DISPLAYAUTO
ANSWER
DIRECT MEM : M1-M2-M3-M4
DATE & TIME : ►DATE FORMAT ►TIME FORMAT ►SET
TIME ►SET DATE
ALARM : ►ON ►OFF
REGISTRATION : BASE 1, 2, 3 or 4
DEFAULT : PIN? 0000 by default
ANS. MACHINE
►MSG PLAYBACK ►DELETE ALLMEMO ►TAM ON/OFF
TAM SETTINGS (ANSWER MODE, TAM LANGUAGE,
OGM SETTINGS,ANSWER DELAY, RECORD TIME,
COMPRESSION, BS SCREENING,REMOTE ACC,
CHANGE PIN)
HANDSET REGISTRATION
Note: Handset and base station are pre-registered.
Up to five handsets can be registered to a single base station.
In the case of re-registration, the PIN code is 0000.
Registering a handset
On Base: press and hold /HANDSET LOCATOR on the
base unit to hear a beep to enter the registration mode.
At the same time on Handset:Press MENU/OK
select
▼▲ REGISTRATION. Press MENU/OK select ▼▲
BASE(1-4), Press MENU/OK enter 4 digits PIN for the
base PIN.
1

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Geemarc-Amplidect-295-Photo

Zoeken resetten

  • Ik installeer het model Geemarc 295 en ik krijg geen toon uit het toestel

    Wat ben
    ik vergeten te doen? Gesteld op 28-12-2023 om 19:10

    Reageer op deze vraag Misbruik melden
  • Kan niet vinden hoe ik mijn boodschap in het antwoordapparaat moet kan inspreken?

    Gesteld op 29-7-2023 om 16:32

    Reageer op deze vraag Misbruik melden
  • Misschien een stomme vraag maar als ik probeerde vandaag voor het eerst het basisstation. Als ik van het basisstation gebruik maak voor een oproep, door 2 seconden op een foto te duwen, krijg ik het gesprek daarna niet beëindigd, op de rode neerlegtoets drukken werk niet. Moet dit op een andere manier of zou het stuk zijn??? Gesteld op 6-5-2023 om 22:21

    Reageer op deze vraag Misbruik melden
  • We zijn deze telefoon aan het installeren. Alles doet het , de telefoon gaat over maar we horen niets Gesteld op 20-12-2022 om 13:07

    Reageer op deze vraag Misbruik melden
  • Ik kan de tijd niet op het display krijgen er staat op display 1 ong cid Gesteld op 20-11-2022 om 11:26

    Reageer op deze vraag Misbruik melden
  • Ik heb een urgente vraag voor mn ouders die nu niet meer bereikbaar zijn.
    Wanneer ik ze bel krijg ik een ingesprektoon. Telefoon ligt op het apparaat. Er is wel een foutcode die ik niet kan vinden namelijk ONG CID. Weet iemand hoe ik het weer werkend krijg? Gesteld op 31-8-2022 om 13:35

    Reageer op deze vraag Misbruik melden
  • 6
  • Wat wordt bedoeld met TAM?
    Hoe zet je de voicemail uit? Gesteld op 24-1-2022 om 19:47

    Reageer op deze vraag Misbruik melden
  • Hallo hoe moet ik de taal veranderen van de handset :) Gesteld op 28-11-2021 om 10:46

    Reageer op deze vraag Misbruik melden
    • 9.3.6De taal van uw handset instellenU kunt de taal die gebruikt wordt op het scherm van de handset kiezen. U hebt de keuzeuit 7 talen: English, Français, Deutsch, Nederlands, Italiano, Espanol, Pycckna.1.Druk op de LINKER SOFTKEYen om HS INSTELLINGENte kiezen.2.Druk op de LINKER SOFTKEYen om TAALte kiezen.3.Druk op de LINKER SOFTKEYen om de door u gewenste taal te kiezen.4.Druk op de LINKER SOFTKEYom dit te bevestigen.9.3.7De handset een nieuwe naam geven (Rename HS)1.Druk op de LINKER SOFTKEYen om HS INSTELLINGENte kiezen.2.Druk op de LINKER SOFTKEYen om RENAME HSte kiezen.3.Druk op de LINKER SOFTKEYen voer een nieuwe naam van uw handset in.
      304.Druk op de LINKER SOFTKEYom dit te bevestigen Geantwoord op 24-12-2021 om 17:27

      Waardeer dit antwoord Misbruik melden
  • Dag, weet iemand of bij het Geemarc amplidect 295 telefoontoestel beantwoorde oproepen (telefoonnummers) ook zichtbaar zijn in een lijst? In de gebruikershandleiding staat dat alleen de gemiste oproepen in de bellijst staan. Gesteld op 16-11-2021 om 20:51

    Reageer op deze vraag Misbruik melden

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Geemarc Amplidect 295 Photo bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Geemarc Amplidect 295 Photo in de taal/talen: Engels als bijlage per email.

De handleiding is 0,99 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Geemarc Amplidect 295 Photo

Geemarc Amplidect 295 Photo Gebruiksaanwijzing - Nederlands - 50 pagina's

Geemarc Amplidect 295 Photo Gebruiksaanwijzing - Nederlands - 2 pagina's

Geemarc Amplidect 295 Photo Gebruiksaanwijzing - Deutsch - 28 pagina's

Geemarc Amplidect 295 Photo Gebruiksaanwijzing - Deutsch - 2 pagina's

Geemarc Amplidect 295 Photo Gebruiksaanwijzing - Français - 29 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info