512654
16
Verklein
Vergroot
Pagina terug
1/17
Pagina verder
Waste disposal
The appliance has to be deposed by the definition of the regional waste disposal of
electrical scrap.
If necessary get information of the regional waste management enterprise.
Warranty
We guarantee that all our products are free of defects at the time of purchase.
Any demonstrable manufacturing or material defects will be to the exclusion of any further
claim and within 2 years after purchasing the appliance free of charge repaired or substituted.
There is no Warranty claim of the purchaser if the damage or defect of the appliance is
caused by inappropriate treatment, over loading or installation mistakes.
The Warranty claim expires if there is any technical interference of a third party without
an written agreement.
The purchaser has to present the sales slip in assertion-of-claims and has to bear all charges
of costs and risk of the transport.
The warranty becomes invalid and GASTROBACK does not assume liability if:
1. The user did not follow the instructions or the user did not use the appliance as stated and
only for thus use (improper use, misusage).
2. The appliance was connected to a power supply with improper current.
3. The mincer got opened by an unauthorised person.
4. Other then original spare-parts got used.
5. The appliance was in commercial use. Used up parts from commercial use are no
warranty claim.
The mincer is intended for use in the household only!
The mincer blocks up permanently
while operating.
The mincer head moves or loosened while
operating.
The mince leaks out at the side of the
closing ring.
Clear a blocking
If the mincer head is blocked no mince comes out of the mincer while operating or the motor stops
moving automatically because of the overload protection.
ATTENTION: If a blocking occurs turn OFF the appliance immediately. Clear the problem
before turning on the motor again.
1. Turn the appliance OFF and then take the feedstick out of the feed funnel.
2. If the motor stopped running because the overload protection turned itself on you have to
turn the appliance OFF to undo the overload protection.
3. Turn the motor ON and OFF by turns to loosen the blocking.
ATTENTION: If the motor still does not start running turn the appliance OFF, pull the plug
and clean the appliance.
To ensure that the mincer does not seize, never operate it under
excessive pressure. Operate in a slow and constant pace. Do not
try to rush the procedure by pushing down the meat with force.
For mincing hard ingredients really fine start with the mincer plate
with the bigger holes. Mincing the second time use the finer mincer
plate.
The screw plug loosened. Turn the appliance OFF immediately. Press the
mincer head with one hand against the motorblock using the other
hand to tighten the screw plug turning it clockwise.
The closing ring is not screwed on tight enough. Turn the appliance OFF
immediately and then pull the plug. Tighten the closing ring but do not
overwind the winding. If the problem still occurs disassemble and clean
the appliance.
Possible problem Easy solution
3130
41401_Manual_Neu.qxp 01.10.2008 15:40 Seite 30
16

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Gastroback 41401 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Gastroback 41401 in de taal/talen: Duits als bijlage per email.

De handleiding is 0,78 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Gastroback 41401

Gastroback 41401 Veelgestelde vragen - Deutsch - 2 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info