If required you can clean the feed chute by dismantling it from the cover. Nut off
the grub nuts which are in the set collar using an allen key (SW 2,5).
CUTTING WIDTH ADJUSTER
Take off the cover. Release the nuts that are attached to the cover turning them anticlock-
wise. Lift the cover straight across the nuts and then towards your body across the chevron.
There is a chevron in the front of the motorblock which is connected to the motorblock with
two nuts. The chevron defines the width of the slices. Loosening the nuts you can move the
chevron:
pushingthechevronup:slicesaregettingslimmer
pushingitdown:slicesaregettingthicker
Afterpositioningthechevrontightenthenutsandplacethecoveronthetopoftheappli-
ance. Pay attention to the chevron when doing this. Hold the cover in an angle to lift it over
thechevron,thenholditstraighttoliftitoverthenutsontopoftheappliance.Tightenthe
nuts turning them clockwise but NOT too tightly.
Thecuttingresultdependsonthesharpnessofthebladeandthepositionof
the chevron.
STORAGE
Alwayscleantheappliancebeforestoring(seeCareandCleaning).
Ensuretostoretheappliancewhereitisclean,dryandsafefromfrost,directsunlightand
inadmissible strain (mechanical or electric shock, heat, moisture) and where it is out of
reachofyoungchildren.Placetheapplianceonacleanandstablesurface,whereitcan
notfall.Donotplaceanyhardorheavyobjectsontheappliance.
Please check www.gastroback.de for further information. For technical support, please
contactGastrobackCustomerCareCenterbyphone:+49(0)4165/2225-0ore-mailinfo@
gastroback.de.
18 19