730371
5
Verklein
Vergroot
Pagina terug
1/30
Pagina verder
Getting started
WARNING
See the Important safety and product information guide in the
product box for product warnings and other important
information.
1
Connect to a WiFi
®
network (Connecting to a Wi
Fi Network,
page 19)(optional).
2
Pair your Bluetooth
®
phone and headset (Pairing Your Phone
and Headset, page 13) (optional).
3
Update the maps and software on your device (Product
updates, page 20).
4
Acquire GPS signals (Acquiring GPS signals, page 1).
5
Mount the device and connect it to power.
6
Adjust the screen brightness (Adjusting the screen
brightness, page 1).
7
Navigate to your destination (Starting a route, page 5).
Device Overview
power key
microSD
®
memory card slot
USB power and data port
Turning the device on or off
To turn the device on, press the power button or connect the
device to power.
To put the device in power saving mode, press the power
button while the device is on.
While in power saving mode, the screen is off and the device
uses very little power, but it can wake instantly for use.
TIP: you can charge your device faster by putting it in power
saving mode while charging the battery.
To turn off the device completely, hold the power button until
a prompt appears on the screen and select Off.
The prompt appears after five seconds. If you release the
power button before the prompt appears, the device enters
power saving mode.
Acquiring GPS signals
When you turn on your navigation device, the GPS receiver
must collect satellite data and establish the current location. The
time required to acquire satellite signals varies based on several
factors, including how far you are from the location where you
last used your navigation device, whether you have a clear view
of the sky, and how long it has been since you last used your
navigation device. The first time you turn on your navigation
device, it may take several minutes to acquire satellite signals.
1
Turn on the device.
2
Wait while the device locates satellites.
3
If necessary, go to an open area away from tall buildings and
trees.
in the status bar indicates the satellite signal strength. When
at least half of the bars are filled, the device is ready for
navigation.
Status bar icons
The status bar is located at the top of the main menu. The status
bar icons display information about features on the device. You
can select some icons to change settings or view additional
information.
GPS signal status. Hold to view GPS accuracy and acquired
satellite information (Viewing GPS signal status, page 23).
Bluetooth technology status. Select to view the Bluetooth
settings (Bluetooth settings, page 18).
Wi-Fi signal strength. Select to change the Wi-Fi settings (Wi
Fi
settings, page 18).
Connected to hands-free calling. Select to place a phone call
(Hands-free calling, page 14).
Active usage mode. Select to change the usage mode.
Current time. Select to set the time (Setting the Time,
page 18).
Battery charge level.
Garmin Drive
app connection status (Pairing Your Phone and
Headset, page 13).
Temperature. Select to view the weather forecast (Viewing the
weather forecast, page 16).
Fuel status. Select to view fuel tracking information (Fuel
tracking, page 8).
Using the on-screen buttons
On-screen buttons allow you to navigate the pages, menus and
menu options on your device.
Select to return to the previous menu screen.
Hold to quickly return to the main menu.
Select or to scroll through lists or menus.
Hold or to scroll faster.
Select to see a context-based menu of options for the
current screen.
Adjusting the volume
1
Select Volume.
2
Select an option:
Use the slider bar to adjust the volume.
Select to mute the device.
Select a tick box to enable or disable additional sound
options.
Using the audio mixer
You can use the audio mixer to set the volume levels for
different audio types, such as navigation prompts or phone calls.
The level for each audio type is a percentage of the master
volume.
1
Select Volume.
2
Select Audio Mixer.
3
Use the sliders to adjust the volume for each audio type.
Adjusting the screen brightness
1
Select Settings > Display > Brightness.
2
Use the slider bar to adjust the brightness.
Transportation modes
Routing and navigation are calculated differently based on your
transportation mode. The current transportation mode is
indicated by an icon in the status bar.
Getting started 1
5

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Garmin-Zumo-XT

Zoeken resetten

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Garmin Zumo XT bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Garmin Zumo XT in de taal/talen: Engels als bijlage per email.

De handleiding is 3,71 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Garmin Zumo XT

Garmin Zumo XT Gebruiksaanwijzing - Nederlands - 32 pagina's

Garmin Zumo XT Gebruiksaanwijzing - Deutsch - 34 pagina's

Garmin Zumo XT Gebruiksaanwijzing - Français - 34 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info