589620
10
Verklein
Vergroot
Pagina terug
1/14
Pagina verder
When the sensor is paired with your Edge device, the sensor
status is Connected. You can customize a data field to display
Vector data.
Entering the Crank Length
The crank length is often printed on the crank arm.
1Rotate the pedals a few times in order to activate Vector.
2From the home screen, select > Bike Profiles.
3Select a profile.
4Select Crank Length > Manual.
5Enter the crank length, and select .
Performing a Static Zero Calibration
NOTE: During this task, the bike must be in an upright position,
and nothing can be touching the pedals.
1From the home screen, select > Bike Profiles.
2Select a profile.
3Select > Calibrate.
When the zero reference is determined, a message appears
on the Edge device.
Edge 800 Device Instructions
Pairing Vector with the Edge 800 Device
1Bring the Edge device within range (3 m) of the sensor.
NOTE: Stay 10 m away from other ANT+ sensors while
pairing.
2Turn on the Edge device.
3Select MENU > > Bike Settings > Bike Profiles.
4Select a bike.
5Select ANT + Power > Power Meter > Yes.
6Rotate the crank arm a few times.
7Select .
When the sensor is paired with your Edge device, a message
appears, and appears solid on the status page. You can
customize a data field to display Vector data.
Calibrating Vector with the Edge 800 Device
1Enter the crank length (Entering the Crank Length).
2Set the install angle of the sensors inside the pedals (Setting
the Installation Angle).
3Calibrate the static zero reference (Performing a Static Zero
Calibration).
4Calibrate Vector before each ride (Calibrating Vector Before
Each Ride).
Entering the Crank Length
The crank length is often printed on the crank arm.
1Rotate the pedals a few times in order to activate Vector.
2Select MENU > > Bike Settings > Bike Profiles.
3Select a profile.
4Select Bike Details > Crank Length > Custom.
5Enter the crank length, and select .
Performing a Static Zero Calibration
NOTE: During this task, the bike must be in an upright position,
and nothing can be touching the pedals.
1Select MENU > > Bike Settings > Bike Profiles.
2Select a profile.
3Select ANT + Power > Calibrate.
When the zero reference is determined, a message appears
on the Edge device.
Edge 500 Device Instructions
Pairing Vector with the Edge 500 Device
1Bring the Edge device within range (3 m) of the sensor.
NOTE: Stay 10 m away from other ANT+ sensors while
pairing.
2Turn on the Edge device.
3Hold MENU.
4Select Settings > Bike Settings.
5Select a bike.
6Select ANT + Power.
7Enable the sensor, and select Search.
8Rotate the crank arm a few times.
When the sensor is paired with your Edge device, a message
appears, and appears solid on the main menu. You can
customize a data field to display Vector data.
Calibrating Vector with the Edge 500 Device
1Enter the crank length (Entering the Crank Length).
2Set the install angle of the sensors inside the pedals (Setting
the Installation Angle).
3Calibrate the static zero reference (Performing a Static Zero
Calibration).
4Calibrate Vector before each ride (Calibrating Vector Before
Each Ride).
Entering the Crank Length
The crank length is often printed on the crank arm.
1Rotate the pedals a few times in order to activate Vector.
2Hold MENU.
3Select Settings > Bike Settings.
4Select a bike.
5Select Bike Details > More > Crank Length > Manual.
6Enter the crank length.
Performing a Static Zero Calibration
NOTE: During this task, the bike must be in an upright position,
and nothing can be touching the pedals.
1Hold MENU.
2Select Settings > Bike Settings.
3Select a bike.
4Select ANT + Power > Calibrate.
When the zero reference is determined, a message appears
on the Edge device.
Customizing the Data Fields
This procedure contains instructions for the Edge 500 device.
1Hold MENU.
2Select Settings > Bike Settings > Data Fields.
3Select a page.
4Select the number of data fields to appear on the page.
5Select a data field.
Power Data Fields
NOTE: This list contains power data fields for the Edge 1000
device. If you have another compatible device, see your device
owner's manual.
NOTE: Data fields that display pedal smoothness, torque
effectiveness, and balance data are not supported by the Vector
S system.
Balance: The current left/right power balance.
6 Appendix
10

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Garmin Vector S bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Garmin Vector S in de taal/talen: Engels als bijlage per email.

De handleiding is 3,11 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Garmin Vector S

Garmin Vector S Snelstart handleiding - English - 26 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info