544109
12
Verklein
Vergroot
Pagina terug
1/16
Pagina verder
Remote Control
You can start recording, stop recording, and take pictures on
your VIRB device using another compatible Garmin device with
ANT+ wireless technology, such as the VIRB remote control
accessory or the fēnix watch. You can also use your VIRB
device to control other VIRB devices.
Controlling the Device Remotely
1
On your VIRB device, select MODE > SETUP > Remote.
2
Select VIRB Type > Main VIRB.
3
Select an option:
On the remote control device, launch the VIRB app or
feature. See the owner's manual for the device for more
information.
On the remote control accessory, follow the pairing
instructions in the accessory manual.
Controlling Multiple VIRB Devices Remotely
When controlling multiple VIRB devices, you must choose a
main VIRB device. This device controls all your other VIRB
devices.
If you are using a remote control device with multiple VIRB
devices, the remote control device controls only the main VIRB
device. The main VIRB device passes commands received from
the remote control device to the other VIRB devices.
1
On all of your VIRB devices, select MODE > SETUP >
Remote.
2
On your main VIRB device, select VIRB Type > Main VIRB.
3
On each of your other VIRB devices, select VIRB Type >
Extended VIRB.
REC on your main VIRB device starts and stops recording
video on all your VIRB devices. on your main VIRB device
takes a photo from all your VIRB devices.
4
If you are using a remote control device, select an option:
On the remote control device, launch the VIRB app or
feature. See the owner's manual for the device for more
information.
On the remote control accessory, follow the pairing
instructions in the accessory manual.
Operating the Device Using Your Mobile
Device
NOTE: This feature is available for VIRB Elite only.
You can remotely view and control photo and video recording
using a compatible mobile device running the free Garmin VIRB
app. The app connects using a direct Wi-Fi connection between
your VIRB device and your compatible mobile device. Go to
www.garmin.com/VIRB or the application store for your mobile
device for compatibility information.
1
If necessary, install the Garmin VIRB app from the
application store on your mobile device.
2
On your VIRB device, select MODE > SETUP > WIFI > WIFI.
The VIRB device enters wireless host mode, and the
SSID and password appear on the device screen.
3
On your mobile device, go to the wireless settings and
connect to the wireless network that matches the SSID on
the VIRB device screen.
See the owner's manual for your mobile device for more
information.
4
On your mobile device, enter the password that appears on
the VIRB device screen.
5
On your mobile device, start the Garmin VIRB app.
Advanced Wireless Settings
You can change the wireless host settings for your device.
Select MODE > SETUP > WIFI > Advanced.
SSID: Sets the SSID, which identifies your VIRB device on
other devices.
Password: Sets the password used to connect to your VIRB
device.
Troubleshooting
My device does not turn on
Install a memory card (Installing a Memory Card).
The device does not boot if a memory card is not installed.
Verify the battery is installed correctly (Installing the Battery
Pack).
Fully charge the battery (Charging the Lithium-Ion Battery
Pack).
My device display is hard to see
The device has a reflective display that maximizes battery life
and is readable in direct sunlight. The display does not have a
backlight and requires ambient light for visibility. If the display
looks dark or hard to see, you should increase the ambient light
or go to a brighter area.
Some information is missing from the
dashboards
Dashboards are available only for VIRB Elite devices
(Dashboards). Some dashboard information requires you to
enable or pair sensors.
Enable GPS (System Settings), and go to an area with a
clear view of the sky.
Location, speed, distance, and altitude information requires a
GPS signal.
Connect additional ANT+ sensors (Pairing Your ANT+
Sensors).
Some dashboards are available only when a compatible
ANT+ sensor is connected.
My video recordings do not look smooth
If video recordings appear shaky, select MODE > SETUP >
ADVANCED > Stabilize to enable image stabilization.
If video recordings stutter or skip frames, install a class 10 or
better microSD memory card (Installing a Memory Card).
The device requires a class 10 or better memory card to
record smooth high-definition video.
My device turns off when I stop recording
video
If you turn on the device by sliding REC toward the lens, the
device turns off when you slide REC away from the lens. This
allows you to maximize battery life by turning off the device
when it is not recording.
Device Information
System Settings
Select MODE > SETUP > SYSTEM.
GPS: Enables the device to receive GPS satellite signals.
When Recording enables GPS reception only when the
camera is recording video (VIRB Elite only).
NOTE: GPS must be set to On to enable Auto Record.
8 Remote Control
12

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Garmin VIRB bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Garmin VIRB in de taal/talen: Engels als bijlage per email.

De handleiding is 3,98 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Garmin VIRB

Garmin VIRB Snelstart handleiding - Nederlands - 6 pagina's

Garmin VIRB Gebruiksaanwijzing - Nederlands - 16 pagina's

Garmin VIRB Gebruiksaanwijzing - Deutsch - 18 pagina's

Garmin VIRB Gebruiksaanwijzing - Français - 18 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info