657692
5
Verklein
Vergroot
Pagina terug
1/8
Pagina verder
connecting video input and output sources, observe these
considerations.
The chartplotter may have one composite-video input port
labeled CVBS IN or two composite-video input ports labeled
VIDEO 1 and VIDEO 2.
The composite-video ports use BNC connectors. You can
use a BNC to RCA adapter to connect a composite-video
source with RCA connectors to these ports.
The video from sources connected to these ports is
available only for display on the device or on an additional
monitor connected to the device. Composite video is not
shared across the Garmin Marine Network or NMEA 2000
network.
The chartplotter may have one DVI-D video output port. You
can connect a DVI-D or DVI-I cable to the port to view a
mirror image of the screen on a computer monitor or HD TV.
If your device includes a DVI cable connector, a rubber
gasket is included. This gasket must be installed between
the DVI port and cable connector to avoid damage to the
connector.
If needed, you can use a DVI-D to HDMI
®
adapter to
connect to an HD TV or other HDMI compatible display.
Although it is recommended to use DVI cables sold by
Garmin, high-quality third-party DVI cables may be used.
You should test the DVI cable by connecting the devices
before routing the cable.
J1939 Engine Network Connection Considerations
NOTICE
You must use a Garmin GPSMAP J1939 accessory cable when
connecting the chartplotter to the J1939 engine network to
prevent corrosion due to moisture. Using a different cable voids
your warranty.
If you have an existing engine network on your boat, it should
already be connected to power. Do not add any additional power
supply.
This chartplotter can connect to an engine network on your boat
to read data from compatible devices such as certain engines.
The engine network follows a standard and uses proprietary
messages.
You should connect only one chartplotter to one engine network.
Connecting more than one chartplotter to one engine network
may result in unexpected behavior.
The port labeled J1939 is used to connect the device to the
existing engine network. You must route the cable within 6 m
(20 ft.) of the engine network backbone.
The Garmin GPSMAP J1939 accessory cable requires
connection to a power source and proper termination. For more
information on connecting to your engine network, see the
manufacturer's engine documentation.
Pin Wire Color Description
À
Bare Shield
Á
Red Power, positive
Â
Black Power, negative
Ã
White CAN High
Ä
Blue CAN Low
Specifications
Physical Specifications
Device Specification Measurement
All models Temperature range From -15° to 55°C (5° to
131°F)
Material Die-cast aluminum and
polycarbonate plastic
Water rating* IEC 60529 IPX7
Seven-inch
models
Dimensions (W × H ×
D)
222 × 142 × 66 mm (8.75 ×
5.6 × 2.6 in.)
Display size (W × H) 155 × 86 mm (6.1 × 3.4 in.)
Weight 1.13 kg (2.5 lbs)
Eight-inch
models
Dimensions (W × H ×
D)
244 × 160 × 76 mm (9.6 ×
6.3 × 3.0 in.)
Display size (W × H) 178 × 102 mm (7.0 × 4.0 in.)
Weight 1.41 kg (3.1 lbs)
Ten-inch
models
Dimensions (W × H ×
D)
290 × 206 × 79 mm (11.4 ×
8.1 × 3.1 in.)
Display size (W × H) 218 × 135 mm (8.6 × 5.3 in.)
Weight 2.36 kg (5.2 lbs)
Twelve-inch
models
Dimensions (W × H ×
D)
330 × 226 × 79 mm (13.0 ×
8.9 × 3.1 in.)
Display size (W × H) 262 × 163 mm (10.3 ×
6.4 in.)
Weight 2.72 kg (6.0 lbs)
Sixteen-inch
models
Dimensions (W × H ×
D)
426 × 275 × 88 mm (16.76 ×
10.81 × 3.45 in.)
Display size (W × H) 344 × 193 mm (13.55 ×
7.62 in.)
Weight 4.3 kg (9.5 lbs)
*The device withstands incidental exposure to water of up to 1 m
for up to 30 min. For more information, go to www.garmin.com
/waterrating.
Electrical Specifications
Device Specification Measurement
All models Input power From 10 to 32 Vdc
NMEA 2000 LEN 2
NMEA 2000 Draw 75 mA max.
Seven-inch models Max. power usage at
10 Vdc
24 W
Typical current draw at
12 Vdc
1.5 A
Max. current draw at
12 Vdc
2.0 A
Fuse 6 A, 125 V fast-acting
Compass-safe distance 800 mm (31.5 in.)
Eight-inch models Max. power usage at
10 Vdc
27 W
Typical current draw at
12 Vdc
1.8 A
Max. current draw at
12 Vdc
2.3 A
Fuse 6 A, 125 V fast-acting
Compass-safe distance 700 mm (27.6 in.)
5
5

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Garmin GPSMAP 7400 series bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Garmin GPSMAP 7400 series in de taal/talen: Engels als bijlage per email.

De handleiding is 1,11 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Garmin GPSMAP 7400 series

Garmin GPSMAP 7400 series Installatiehandleiding - Nederlands - 8 pagina's

Garmin GPSMAP 7400 series Gebruiksaanwijzing - Nederlands - 68 pagina's

Garmin GPSMAP 7400 series Installatiehandleiding - Deutsch - 8 pagina's

Garmin GPSMAP 7400 series Gebruiksaanwijzing - Deutsch - 72 pagina's

Garmin GPSMAP 7400 series Gebruiksaanwijzing - English - 62 pagina's

Garmin GPSMAP 7400 series Installatiehandleiding - Français - 8 pagina's

Garmin GPSMAP 7400 series Gebruiksaanwijzing - Français - 70 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info