740409
4
Verklein
Vergroot
Pagina terug
1/6
Pagina verder
3
Coat the ground screw and crimp connector with marine
sealant.
4
Connect the other end of the wire to the water ground
location on the boat, and coat the connection with marine
sealant.
5
Select an option:
If your radar was not packaged with a voltage converter,
no further grounding is necessary.
If your radar was packaged with a voltage converter,
proceed to the next step.
6
Route a different 3.31 mm² (12 AWG) copper wire to water
ground location and to the voltage converter.
7
Loosen a screw on one corner of the voltage converter, and
secure the copper wire to the screw.
8
Coat the screw and wire on the voltage converter with marine
sealant.
9
Connect the other end of the wire to the water ground
location on the boat, and coat the connection with marine
sealant.
Garmin Marine Network Considerations
This device connects to Garmin Marine Network devices to
share radar data with compatible devices on the network. When
connecting to a Garmin Marine Network device, observe these
considerations.
A Garmin Marine Network cable must be used for all Garmin
Marine Network connections.
You cannot cut a Garmin Marine Network cable. You must
use a longer cable or add extensions where necessary.
Garmin Marine Network cables and extension cables are
available from your Garmin dealer.
If necessary, you may need to use a Garmin Marine Network
adapter cable to connect this device to your chartplotter or
GMS
10 network port expander.
Connecting a Garmin Marine Network Cable
1
Route one end of the Garmin Marine Network cable to the
radar.
NOTE: The included Garmin Marine Network cable uses a
90-degree connector to connect to the NETWORK port on
the radar housing so that it fits correctly behind the radar
door. If you do not plan to install the door on the radar
housing, you can purchase a Garmin Marine Network cable
with a straight connector from your Garmin dealer.
2
Connect the cable to the NETWORK port on the radar.
NOTICE
Use caution when connecting the cable to the radar. If you
attempt to connect the cable at an angle, you may damage
the pins on the NETWORK port.
3
Turn the ring on the cable clockwise to secure the cable to
the radar.
Installing a Garmin Marine Network Adapter Cable
If necessary, you can use the included Garmin Marine Network
adapter cable to connect this device to your chartplotter or GMS
10 network port expander.
1
Connect the Garmin Marine Network cable to the device, and
route it to your chartplotter or port expander.
2
If it is not already pre-installed, connect the included adapter
to the end of the Garmin Marine Network cable.
3
Connect the adapter cable to your chartplotter or port
expander.
Installing the Cable Cover
You must mount the radar, route all cables, and connect them to
the radar before you can install the cable cover.
1
Hold the cable cover parallel to the side of the pedestal .
2
Slide the cable cover onto the pedestal , and slide the tab
into the slot on the pedestal.
3
Secure the cable cover to the pedestal using the attached
screws.
Radar Operation
All functions of this radar are controlled with your Garmin
chartplotter. See the Radar section of your chartplotter's owner's
manual for operating instructions. To download the latest
manual, go to garmin.com/manuals.
If you have more than one radar on your boat, you must be
viewing the radar screen for the radar you want to configure.
Software Update
You must update the Garmin chartplotter software when you
install this device.
If your chartplotter has WiFi
®
technology, you should update the
software using the ActiveCaptain
®
app on a compatible Android
or Apple
®
device.
If your chartplotter does not have WiFi technology, you should
update the software using a memory card and a Windows
®
or
Mac
®
computer.
For more information, go to support.garmin.com.
Specifying the Antenna Size
Before you can use the radar on your system, you must specify
the antenna size.
1
Turn on the radar and all devices connected to the Garmin
Marine Network.
An antenna-selection prompt appears on the connected
chartplotters.
NOTE: If the entire system is being turned on for the first
time, the antenna-selection screen is part of the initial setup
process.
2
Select the installed antenna size for each open-array radar
installed on the boat.
4
4

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Garmin GMR Fantom 256 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Garmin GMR Fantom 256 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,62 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Garmin GMR Fantom 256

Garmin GMR Fantom 256 Installatiehandleiding - Nederlands - 6 pagina's

Garmin GMR Fantom 256 Installatiehandleiding - Deutsch - 8 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info