501977
3
Verklein
Vergroot
Pagina terug
1/28
Pagina verder
GHP12InstallationInstructions 3


The GHP 12 autopilot system consists of multiple components.
Familiarize yourself with all of the components before beginning
installation. You must know how the components operate together in
order to correctly plan the installation on your boat.
As you familiarize yourself with the GHP 12 components, conrm
that your package includes the items listed below. All the components,
except the drive unit, are included in the GHP 12 core box. The drive
unit is sold separately (page 8). If any parts are missing, contact your
Garmin dealer immediately.
Record the serial number of each component in the space provided.

The GHP 12 autopilot system consists of four main components: the
Course Computer Unit (CCU), the Electronic Control Unit (ECU), the
GHC
10 user control interface, and the drive unit (sold separately, see
page 8).

The CCU acts as the brain of the GHP 12. The CCU contains the
sensory equipment used to determine heading. The CCU connects to the
ECU and to the GHC 10 with a single cable. The CCU also connects
to a NMEA 2000
®
network to communicate with the GHC 10, and to
optional NMEA 2000-compatible devices, such as a chartplotter and a
wind sensor (page 11).


The ECU connects to the CCU and to the drive unit. The ECU controls
the drive unit based on information from the CCU. The ECU powers
both the CCU and the drive unit.


The GHC 10 is the primary interface used to operate the GHP 12
autopilot system. Using the GHC 10, you engage and steer the GHP 12.
You also set up and customize the GHP 12 using the GHC 10.
The GHC 10 connects to a NMEA 2000 network to communicate
with the CCU. The GHC 10 also connects with optional NMEA
2000-compatible devices, such as a wind sensor, a water-speed sensor,
or a GPS device, to use advanced features of the GHP 12. If NMEA
2000-compatible devices are not available, you can connect the GHC 10
to optional NMEA 0183-compatible devices instead.


The GHP 12 autopilot system includes multiple cables. These cables
connect the components to power, to each other, to an alarm, and to
optional devices.

This cable connects the CCU to the ECU. A portion of this cable
contains color-coded wires with bare ends. These wires connect the
CCU to the alarm and to the yellow wire from the GHC 10.

When installing the GHP 12 system, you may need to mount the
CCU farther than 16 ft. (5 m) from the ECU. Garmin offers optional
replacement or extension cables for purchase if this is necessary.
 
Replacement 32 ft. (10 m)
Replacement 66 ft. (20 m)
Extension 16 ft. (5 m)
Extension 50 ft (15 m)
Extension 82 ft. (25 m )
Contact your local Garmin dealer or Garmin Product Support for
ordering information.

The alarm provides audible alerts from the GHP 12 (page 9).
3

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Garmin GHP 12 Autopilot System bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Garmin GHP 12 Autopilot System in de taal/talen: Engels als bijlage per email.

De handleiding is 2,75 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Garmin GHP 12 Autopilot System

Garmin GHP 12 Autopilot System Installatiehandleiding - Nederlands - 10 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info