590084
6
Verklein
Vergroot
Pagina terug
1/8
Pagina verder
The autopilot steers your boat through a tack or gybe, and
"Tacking" displays on the heading screen until the maneuver
is complete.
Tacking and Gybing from Wind Hold
Before you can engage wind hold, you must have a wind sensor
installed.
1
Engage wind hold (page 3).
2
Select Menu > Tack/Gybe.
3
Select TACK or GYBE.
The autopilot steers your boat through a tack or gybe, and
information about the progress of the tack or gybe appears
on the screen.
Setting a Tack and Gybe Delay
The tack and gybe delay allows you to delay steering a tack and
gybe after you initiate the maneuver.
1
Select Menu > Setup > User Autopilot Setup > Sailing
Configuration > Tack/Gybe Delay.
2
Select or to determine the length of the delay (from 0 to
15 seconds).
3
Select Done.
Enabling the Gybe Inhibitor
NOTE: The gybe inhibitor does not prevent you from manually
performing a gybe using the helm or step steering.
The gybe inhibitor prevents the autopilot from performing a
gybe.
1
Select Menu > Setup > User Autopilot Setup > Sailing
Configuration > Gybe Inhibitor.
2
Select Enabled.
Device Configuration
User Autopilot Settings
Select Menu > Setup > User Autopilot Setup.
Power Mode: Sets the device power mode to normal or
economy mode. Economy power mode allows you to set the
percentage of power used to run the autopilot.
Power Saver: Controls the aggressiveness of the autopilot. The
autopilot makes fewer adjustments in power saver mode.
Configuring the Remote Control
NOTE: The Garmin quatix watch can be configured to act as a
remote control for the helm control. See the instructions that
came with the watch for more information.
You can connect one optional remote control to the helm
control.
Select Menu > Setup > Remote.
Searching for a Remote Control
Select Menu > Setup > Remote > Search for Remote.
Pairing a Remote
1
Search for a remote control (page 4).
2
Begin pairing the remote control according to the instructions
that came with that accessory.
A message appears on the helm control after the remote has
been paired successfully.
3
Select Connect.
Assigning Remote Button Actions
CAUTION
If you assign a pattern to a button on the remote control,
remember that you are responsible for the safe operation of
your boat. Do not begin a pattern until you are certain the water
is clear of obstacles.
NOTE: If you assign direction control functionality to a button on
the remote, the autopilot must be in standby mode to change
the direction (forward or reverse).
1
Select Menu > Setup > Remote.
2
Select a remote button to assign an action to.
3
Select a button action.
4
If necessary, repeat steps 2 and 3 for the remaining buttons.
Disconnecting a Remote Control
1
Select Menu > Setup > Remote.
2
Select Disconnect Remote.
Display Settings
Select Menu > Setup > Display.
Color Mode: Sets the device to display day or night colors.
Configure Colors: Sets the color configuration for each color
mode. For day color mode, you can select a full color or high
contrast color configuration. For night color mode, you can
select a full color, red and black, or green and black color
configuration.
Backlight: Sets the backlight level.
Network Sharing: Allows you to share color mode, color
configuration, and backlight settings with other devices
across the NMEA 2000 network.
System Settings
Select Menu > Setup > System.
Units: Sets the units of measure.
Heading: Sets the reference used in calculating heading
information.
Variance: Adjusts the variance from true north. This setting is
only available when the heading is set to True.
Beeper: Sets if and when audible sounds are used.
Auto Power: Enables the device to turn on automatically when
the NMEA 2000 network turns on.
GHC Low Volt. Alarm: Sounds an alarm when the voltage of
the power supply connected to the device drops below a
specified level.
Language: Sets the on-screen language.
Operating Mode: Allows you to set the operating mode to
normal or store demo mode.
System Information: Allows you to view software information.
Factory Defaults: Resets the unit to factory defaults.
4 Device Configuration
6

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Garmin GHC 20 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Garmin GHC 20 in de taal/talen: Engels als bijlage per email.

De handleiding is 2,58 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Garmin GHC 20

Garmin GHC 20 Gebruiksaanwijzing - Deutsch - 8 pagina's

Garmin GHC 20 Gebruiksaanwijzing - Français - 8 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info