589542
20
Verklein
Vergroot
Pagina terug
1/28
Pagina verder
User Profile: Allows you to access and customize your personal
statistics (Setting Up Your User Profile).
Language: Sets the language displayed on the device.
Time: Adjusts the time settings (Time Settings).
Backlight: Adjusts the backlight settings (Backlight Settings).
Sounds: Sets the device sounds, such as key tones, alerts, and
vibrations.
Units: Sets the units of measure used on the device (Changing
the Units of Measure).
GLONASS: The default satellite system option is GPS. You can
enable the GLONASS option for increased performance in
challenging environments and faster position acquisition.
Using the GPS and GLONASS options can reduce battery
life more than using the GPS option only.
Pos. Format: Sets the geographical position format and datum
options.
Format: Sets general format preferences, such as the pace and
speed shown during activities, and the start of the week.
Data Recording: Sets how the device records activity data. The
Smart recording option (default) allows for longer activity
recordings. The Every Second recording option provides
more detailed activity recordings, but may not record entire
activities that last for longer periods of time.
USB Mode: Sets the device to use mass storage mode or
Garmin mode when connected to a computer.
Restore Defaults: Allows you to reset user data and settings
(Restoring All Default Settings).
Software Update: Uses a WiFi connection to check for
software updates to the device.
About: Displays device, software, and license information.
Time Settings
Hold UP, and select Settings > System > Time.
Time Format: Sets the device to show time in a 12-hour or 24-
hour format.
Set Time: Sets the time zone for the device. The Auto option
sets the time zone automatically based on your GPS position.
Time: Allows you to adjust the time if it is set to the Manual
option.
Backlight Settings
Hold UP, and select Settings > System > Backlight.
Mode: Sets the backlight to turn on manually or for keys and
alerts.
Timeout: Sets the length of time before the backlight turns off.
Brightness: Sets the brighness level of the backlight.
Changing the Units of Measure
You can customize units of measure for distance, pace and
speed, elevation, weight, height, and temperature.
1Hold UP.
2Select Settings > System > Units.
3Select a measurement type.
4Select a unit of measure.
ANT+ Sensors
The device is compatible with these optional, wireless ANT+
accessories.
Heart rate monitor, such as HRM-Run (Putting On the Heart
Rate Monitor)
Bike speed and cadence sensor (Using an Optional Bike
Cadence Sensor)
Foot pod (Foot Pod)
Power sensor, such as Vector
tempe
wireless temperature sensor (tempe)
For information about compatibility and purchasing additional
sensors, go to http://buy.garmin.com.
Pairing ANT+ Sensors
The first time you connect a sensor to your device using ANT+
wireless technology, you must pair the device and sensor. After
they are paired, the device connects to the sensor automatically
when you start an activity and the sensor is active and within
range.
NOTE: If a heart rate monitor was bundled with your device, the
included heart rate monitor is already paired with your device.
1If you are pairing a heart rate monitor, put on the heart rate
monitor (Putting On the Heart Rate Monitor).
The heart rate monitor does not send or receive data until
you put it on.
2Bring the device within 3 m (10 ft.) of the sensor.
NOTE: Stay 10 m (33 ft.) away from other ANT+ sensors
while pairing.
3Hold UP.
4Select Settings > Sensors > Add New.
5Select an option:
Select Search All.
Select your sensor type.
After the sensor is paired with your device, the sensor status
changes from Searching to Connected. Sensor data appears
in the data page loop or a custom data field.
Putting On the Heart Rate Monitor
NOTE: If you do not have a heart rate monitor, you can skip this
task.
You should wear the heart rate monitor directly on your skin, just
below your sternum. It should be snug enough to stay in place
during your activity.
1Snap the heart rate monitor module À onto the strap.
The Garmin logos on the module and the strap should be
right-side up.
2Wet the electrodes Á and the contact patches  on the back
of the strap to create a strong connection between your chest
and the transmitter.
3Wrap the strap around your chest, and connect the strap
hook à to the loop Ä.
NOTE: The care tag should not fold over.
16 ANT+ Sensors
20

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Garmin Fenix 3 - 2015 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Garmin Fenix 3 - 2015 in de taal/talen: Engels als bijlage per email.

De handleiding is 4,52 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Garmin Fenix 3 - 2015

Garmin Fenix 3 - 2015 Gebruiksaanwijzing - Nederlands - 30 pagina's

Garmin Fenix 3 - 2015 Gebruiksaanwijzing - Deutsch - 30 pagina's

Garmin Fenix 3 - 2015 Gebruiksaanwijzing - Français - 30 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info