Handleiding Garmin D2 Pilot (pagina 12 van 24) (Engels)

563575

Verklein

Vergroot

Pagina terug

1/24

Pagina verder

4Complete one or more actions to enter your jump

information:

• Select DIP to set a waypoint for the desired landing

location.

• Select Drop Alt to set the drop altitude AGL (in feet)

when the jumpmaster exits the aircraft.

• Select Open Alt to set the open altitude AGL (in feet)

when the jumpmaster opens the parachute.

• Select FWD Throw to set the horizontal distance traveled

(in meters) due to aircraft speed.

• Select Crs to HARP to set the direction traveled (in

degrees) due to aircraft speed.

• Select Wind to set the wind speed (in knots) and direction

(in degrees).

• Select Constant to fine-tune some information for the

planned jump. Depending on the jump type, you can

select Percent Max, Safety Fctr, K-Open, K-Freefall, or

K-Static and enter additional information (Constant

Settings).

• Select Auto to DIP to enable navigation to the DIP

automatically after you jump.

• Select GOTO HARP to start navigation to the HARP.

Entering Wind Information for HAHO and HALO

Jumps

1Select the action key.

2Select Jumpmaster.

3Select a jump type (Jump Types).

4Select Wind > Add.

5Select an altitude.

6Enter a wind speed in knots and select Done.

7Enter a wind direction in degrees and select Done.

The wind value is added to the list. Only wind values

included in the list are used in calculations.

8Repeat steps 5–7 for each available altitude.

Resetting Wind Information

1Select the action key.

2Select Jumpmaster.

3Select HAHO or HALO.

4Select Wind > Reset.

All wind values are removed from the list.

Entering Wind Information for a Static Jump

1Select the action key.

2Select Jumpmaster > Static > Wind.

3Enter a wind speed in knots and select Done.

4Enter a wind direction in degrees and select Done.

Constant Settings

Select Jumpmaster, select a jump type, and select Constant.

Percent Max: Sets the jump range for all jump types. A setting

less than 100% decreases the drift distance to the DIP, and

a setting greater than 100% increases the drift distance.

More experienced jumpmasters may want to use smaller

numbers, and less experienced skydivers may want to use

larger numbers.

Safety Fctr: Sets the margin of error for a jump (HAHO only).

Safety factors are usually integer values of two or greater,

and are determined by the jumpmaster based on

specifications for the jump.

K-Freefall: Sets the wind drag value for a parachute during

freefall, based on the parachute canopy rating (HALO only).

Each parachute should be labeled with a K value.

K-Open: Sets the wind drag value for an open parachute,

based on the parachute canopy rating (HAHO and HALO).

Each parachute should be labeled with a K value.

K-Static: Sets the wind drag value for a parachute during a

static jump, based on the parachute canopy rating (Static

only). Each parachute should be labeled with a K value.

VIRB™ Remote

The VIRB remote function allows you to control your VIRB

action camera from a distance. Go to www.garmin.com/VIRB to

purchase a VIRB action camera.

Controlling a VIRB Action Camera

Before you can use the VIRB remote function on your device,

you must enable the remote setting on your VIRB camera. See

the owner's manual for your VIRB camera for more information.

1Turn on your VIRB camera.

2From your device, select the action key, and select VIRB

Remote.

3Wait while the device connects to your VIRB camera.

4Select an option:

• To record video, select .

• To stop recording video, select .

• To take a photo, select the action key.

Clock

Setting the Alarm

1Select the action key.

2Select Clock > Alarm Clock > Add Alarm.

3Select the action key, , and to set the time.

4Select Tone, Vibration, or Tone & Vib..

5Select Once, Daily, or Weekdays.

Starting the Countdown Timer

1Select the action key.

2Select Clock > Timer.

3Select the action key, , and to set the time.

4If necessary, select Notification, and select a type of

notification.

5Select Start.

Using the Stopwatch

1Select the action key.

2Select Clock > Stopwatch.

3Select Start.

Adding a Custom Time Zone

1Select the action key.

2Select Clock > Alt. Zones > Add Zone.

3Select a time zone.

The custom time zone page is added to the current profile.

Editing a Custom Time Zone

1Select the action key.

2Select Clock > Alt. Zones.

3Select a time zone.

4Select an option:

• To change the time zone, select Edit Zone.

• To customize the name of the time zone, select Edit

Label.

• To delete the time zone from the quick page loop, select

Delete > Yes.

8 Applications

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

lees eerst de handleiding door;
controleer of uw vraag al eerder door iemand anders is gesteld;
probeer uw vraag zo duidelijk mogelijk te stellen;
heeft u een probleem en al geprobeerd om dit op te lossen, vermeld dit erbij aub;
heeft u een oplossing gekregen van een bezoeker dan horen wij dat graag in dit forum;
wilt u een reactie geven op een vraag of antwoord, gebruik dan niet dit formulier maar klik op de knop 'reageer op deze vraag';
uw vraag wordt direct op de website gezet; vermijd daarom persoonlijke gegevens in te vullen;

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Garmin D2 Pilot Handleiding

Hulp nodig? Stel uw vraag in het forum

Misbruik melden

Product:

Spelregels forum

Abonneren

Ontvang uw handleiding per email

Andere handleiding(en) van Garmin D2 Pilot

Uw handleiding is per email verstuurd. Controleer uw email

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

U heeft geen emailadres opgegeven

Uw vraag is op deze pagina toegevoegd

Info