589667
1
Verklein
Vergroot
Pagina terug
1/2
Pagina verder



See the Important Safety and Product Information guide in the GPS device
product box for product warnings and other important information.
Do not use a sharp object to remove user replaceable batteries. Contact your
local waste disposal department to properly recycle the batteries.
1. Locate the circular battery cover
on the back of the chirp.
2. Twist the cover counter-clockwise until it is loose enough to remove.
3. Remove the cover and the battery.
4. Place the new battery into the cover with the positive side facing the
inside of the cover.
5. Replace cover by aligning the dots
and rotating clockwise.

TIP: If you are programming multiple chirp accessories, install only one
battery at a time.

There are several ways to program your chirp. You must have a compatible
Garmin device in order to program the chirp.
1. From the geocaching settings on your Garmin device, enable chirp™
Searching.
2. From your Garmin device, select Program chirp™.
3. Select an option:
Select Show chirp™ Details to view and edit chirp information.
Select Send Waypoint to select a saved waypoint from your
compatible device.
Select Send Geocache to select a saved geocache from your
compatible device.
Select Erase to erase chirp data.

As the owner of the chirp, your device automatically creates a PIN-entry
to program the chirp securely. This prevents non-owners (nders) from
reprogramming your chirp. The PIN is the last ve digits of the unit ID from
the last Garmin device you used to program the chirp. To nd your unit ID,
refer to the owners manual for your Garmin device.
1. From the geocaching settings on your compatible Garmin device, enable
chirp™ Searching.
2. From your compatible Garmin device, select Program chirp™.
3. Enter the PIN.

1. From the geocaching settings on your compatible Garmin device, enable
chirp™ Searching.
2. From your compatible Garmin device, select Program chirp™.
3. Select Show chirp™ Details > Edit.
4. Select Change Name, Change Message, or Change Coordinates.

1. From the geocaching settings on your Garmin device, enable chirp™
Searching.
2. From your Garmin device, select Program chirp™.
3. Select Erase > Yes.

Use the adhesive mount when attaching the chirp to a container.
1. Attach one side of the adhesive mount to the center of the battery door.
2. Attach the other side of the adhesive mount to the top of the container.

Do not mount the chirp inside a metal container.
Do not bury the chirp.
Do not put the chirp in water.
A compatible Garmin device should detect the chirp within (32.9 ft)
10 m. For maximum transmission range, allow the chirp to have an
unobstructed view in all directions.
chirp Owners Manual
1

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Garmin Chirp bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Garmin Chirp in de taal/talen: Engels als bijlage per email.

De handleiding is 0,28 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Garmin Chirp

Garmin Chirp Gebruiksaanwijzing - Nederlands - 2 pagina's

Garmin Chirp Gebruiksaanwijzing - Deutsch - 2 pagina's

Garmin Chirp Gebruiksaanwijzing - Français - 2 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info