332143
23
Verklein
Vergroot
Pagina terug
1/24
Pagina verder
23
Not every malfunction can be ascribed to a defect
o
f your cooker. If your appliance should not function
properly, search for the fault in the list below. If you
are not successful in remedying the fault with the
aid of the list below, then contact your Gaggenau
after-sales service.
The hob does not work
Check that the household fuses for the appliance
are OK. Check if there has been a power cut.
The hob functions but does not heat up. A spot
lights constantly in the timer display.
The hob is on show room mode after installation.
Disconnect the hob from the power supply for at
least 10 seconds. Reconnect the hob and within
3 minutes carry out the following procedure:
1 Hob must be switched of at main switch. Timer
must be off.
2 Touch the symbol extension l and keep the
finger pressed down. Within 3 seconds touch
and release the main switch.
3 Remove your finger from the symbol extension.
A signal will sound. The spot in the timer
display goes off.
The hob has switched itself off
The main switch was touched accidentally. Switch
the hob back on.
u400 displa
y
The hob is connected incorrectly.
Disconnect the appliance from the mains using the
household fuse or the circuit breaker in the fuse
box. Call the installation technician.
E flashes in a cooking zone display
The control panel is very dirty, food has spilt over or
there is an object on the control panel. Wipe the
contr
ol panel thoroughly or remove the object.
Touch the appropriate control panel. The flashing
stops.
E f
lashes in all the cooking zone indicators and a
signal sounds
The main switch was touched continuously for more
t
han 5 seconds or there is an object on the main
switch. Wipe the control panel thoroughly or
remove the object. Switch the hob back on.
Er display and numbers
If an Er and numbers appear in the display, there is
a fault with the electronics. Switch the hob off and
on again using the household fuse or the circuit
breaker in the fuse box. Call the after-sales service
if the display appears again.
F2 display
The hob is too hot and has switched itself off.
Remove the pans from the cooking zones.
F2
disappears from the display when the indicator is
acknowledged (by touching any control panel) and
when the cooking zones have cooled sufficiently.
Wait a few minutes until the cooking zones have
cooled down slightly. If
F2 appears again after the
cooking zones are switched back on, the hob is still
too hot. Switch off the cooking zones and allow to
cool further.
F4 display
The control panel is too hot and the hob has
switched itself off. Check whether there is a hot
pan on the control panel.
R
emove the pan from the control panel. Wait a few
minutes until the control panel has cooled down
slightly. If
F4 appears again after the cooking zones
are switched back on, call the after-sales service.
F8 display
A cooking zone has been in constant operation for
t
oo long. The holida
y safeguard was activated.
Switch off the cooking zone. It can be switched on
again immediately.
Trouble shooting
23

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Gaggenau ce 492 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Gaggenau ce 492 in de taal/talen: Engels als bijlage per email.

De handleiding is 1,04 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Gaggenau ce 492

Gaggenau ce 492 Gebruiksaanwijzing - Nederlands - 24 pagina's

Gaggenau ce 492 Gebruiksaanwijzing - Deutsch - 24 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info