803347
2
Verklein
Vergroot
Pagina terug
1/8
Pagina verder
The system is set
up by sending
SMS messages
to the emergency
key number using
another phone.
9
SMS
The alarm key must initialize the GPS system properly at rst. It is important to do this properly at rst so that you can make
optimal use of the GPS reception in future.
1. Program an SOS number as described above.
2. Activate the SOS on the alarm key, but do this outside where you can be assured of good GPS reception.
3. Accept the emergency call on your smartphone and wait until you receive the location (during the call) by SMS. This is
most likely another Network Location determination.
4. The call may be disconnected
5. Wait 5 minutes.
Repeat steps 2, 3 and 4 until you receive an SMS via GPS Location.
If you still receive the SMS with a Network Location, repeat these
steps at a di󰀨erent outside location.
If it still does not work, please contact our Service number
(see Manual).
V1.6
SMS codes:
Each SMS to be set starts with $ #, followed by the programming code, then a four-digit password (default “1234”),
then optionally a setting such as a phone number and ends with #.
Note that all programming codes must be sent in capital letters.
SOS1, SOS2, SOS3, SOS4 or SOS5 setting:
$#SOS1,1234,0612345678#
$#SOS2,1234,0612345678#
$#SOS3,1234,0612345678# etc.
0612345678 is the number here, replace it with the number you wish to set
SOS1, SOS2, SOS3, SOS4 SOS5 erasing:
$#SOS1,1234,#
$#SOS2,1234,#
$#SOS3,1234,# etc.
M1, M2 or M3 setting:
$#M1,1234,0612345678#
$#M2,1234,0612345678#
$#M3,1234,0612345678#
0612345678 is the number here, replace it with the number you wish to set
M1, M2 or M3 erasing:
$#M1,1234,#
$#M2,1234,#
$#M3,1234,#
Request location: $#GPS,1234#
By callback via emergency button: $#CALL,1234#
Call or vibrate: $#AU,1234,1# (1=Call, 2=Vibrate, 3=Call+Vibrate)
Activating/deactivating the warning tone when the battery is empty:
$#BATTERY,1234,1# / $#BATTERY,1234,0#
Setting up:
Specications:
Network: GSM900 / DSC1800 / WCDMA / LTE / WIFI
SAR:
<0,4W/kg/<0,6W/kg/<0,3W/kg/<0,4W/kg/<0,1W/kg
Power: GSM: 880-960MHz < 2W
DCS: 1710-1880MHz < 1W
WCDMA: 1850MHz-1990MHz < 0.2W
LTE: 1920-2170MHz < 0.2W
WIFI: 2412-2484MHz < 0.1W
10 GPS Initialisation:
2

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Fysic FXA-100 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Fysic FXA-100 in de taal/talen: Nederlands, Duits, Engels, Frans als bijlage per email.

De handleiding is 36.46 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info