Original Bedienungsanleitung FUXTEC FX-MT152/-MT152E/-MT252_de_en_fr_ita_rev18
62
o Use only specially designed containers.
o Never remove the filler cap or add gasoline while the engine is running or hot.
Allow the engine and exhaust parts to cool down before refilling.
o Do not smoke.
o Only refuel outdoors.
o Never store the hedge trimmer or fuel tank in a room with an open flame, such as a water
heater.
o If gasoline has leaked, do not attempt to start the engine, but remove the gasoline residue
from the device before starting.
o Always replace the fuel cap after filling the tank and close it securely.
o If the tank is emptied, this should be done outdoors.
● If the cutting device touches a foreign object or if the operating noise increases or
the hedge trimmer vibrates unusually strongly, stop the engine and let the hedge
trimmer come to a standstill. Remove the spark plug connector from the spark plug
and take the following actions:
o check for damage;
o check for loose parts and secure all loose parts;
o replace damaged parts with equivalent parts or have them repaired.
● Warning! Always wear hearing and eye protection when using the device.
● Instructions on how to stop the hedge trimmer in an emergency: Unlock the
throttle. Let the device return to idle. Push the engine stop switch on the handle
upwards until the device stops. If it does not stop, pull out the spark plug connector
in an emergency. Never leave the device unattended while it is running.
Notes for operation
a) The engine must be stopped before:
cleaning or removing a blockage;
inspection, maintenance or work on the hedge trimmer;
adjusting the working position of the cutting device;
leaving the hedge trimmer unattended.
b) Always ensure that the hedge trimmer is appropriately in one of the specified working positions
before starting the engine.
c) Always ensure that the hedge trimmer is in a safe position when operating the hedge trimmer. Do
not step on the hedge trimmer or use a ladder.
d) Do not use the hedge trimmer with a defective or heavily worn cutting device.
e) To reduce the risk of fire, ensure that the engine and silencer are free of deposits, leaves, or
escaping lubricant.
