747922
183
Verklein
Vergroot
Pagina terug
1/183
Pagina verder
183
Data
FX-22/FX-30/T14SG/T12FG ĺFX-36 MODEL DATA CONVERSION
The model data (only latest version) of FX-22/FX-30/T14SG/T12FG can be copied to FX-36.
* SD card is required.
* The model data of FX-36 cannot be copied to FX-22/FX-
30/T14SG/T12FG.
* Functions in FX-22/FX-30/T14SG/T12FG, functions not
in FX-36 are not converted.
[Model data conversion method]
1. Attach an SD card that contains model data
of FX-22/FX-30/T14SG/T12FG to the SD slot of
a FX-36.
2. Turn on the power switch, and the Data
Converter should run.
3. The converter shows a list of model data in
the card. Select a model data that you want
to convert and push "CONVERT"
"Yes" key,
and the converter should begin converting
data.
4. If the convert succeeds, the converter will
show the following message. The converted
data are copied to the internal memory
of the FX-36. Hence, if the FX-36 does not
have available space in its internal memory,
converts must fail.
* When SD card cannot be recognized, it may be able to
be used if it reformats by SD formatter offered from SD
Association.
SD formatter is downloadable from SD Association
https://www.sdcard.org/ (As of June, 2017)
CAUTION
After ¿nishing data copy, be sure to perform a
complete check of operation with the model to
be used.
Check well all the directions of operation and
all the operation switches.
5. The converter can accept model data
made by FX-22/FX-30/T14SG/T12FG with the
latest software only. If you try to convert
model data made by old version software,
the converter must fail to convert and show
the following error message. If this message
is shown, do the following procedure to
update the model data in order to avoid
this limitation.
(a) First, update a FX-22/FX-30/T14SG/T12FG to the latest
software.
(b) Load the model data which failed to convert into the FX-
22/FX-30/T14SG/T12FG with the latest software, and the
model data should be updated to the latest format.
(c) Save the updated model data to a SD card.
(d) Retry to convert the updated model data on a FX-36.
FUTABA CORPORATION
Makuhari Techno-Garden Bldg. B-6F, 1-3 Nakase, Mihama-ku, Chiba, 261-8555, Japan
Phone: +81-43-296-8259, Facsimile: +81-43-296-8253
©FUTABA CORPORATION 2017, 10 (1)
Important: Always check the operation of
the model prior to Àight.
183

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Futaba FX36 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Futaba FX36 in de taal/talen: Engels als bijlage per email.

De handleiding is 11,78 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Futaba FX36

Futaba FX36 Gebruiksaanwijzing - Deutsch - 61 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info