522167
5
Verklein
Vergroot
Pagina terug
1/6
Pagina verder
10
11
10
Installation Guide
1. Check clearance around the mounting area before installation, ensuring the area is
free from obstruction, and there is adequate depth for the speaker.
2. Check that the area chosen for mounting the speaker is flat. If the area is curved, it
may not be possible to fit the speaker without “twisting” the frame.
3. If the installation area is only slightly curved, use the extra thick closed cell foam
gasket provided.
4. Using the supplied mounting template, mark the correct diameter on the mounting
surface.
5. Use a suitable cutting tool to remove the marked surface, and drill four holes for the
screws to pass through.
(NOTE: Confirm you are happy with badge position relative to mounting holes)
6. Connect the wires before mounting the speaker. Be sure to observe the correct
polarity.
7. With the grille removed, mount the speaker using the four stainless steel screws, and
the stainless retainer clips supplied. DO NOT over tighten the screws, especially if the
mounting area is not flat.
8. Twist the grille into position.
Installation Tips
Any speaker will only perform to its best capabilities, when correctly placed in the
listening area. FUSION Engineers recognise that unlike a home or motor vehicle installation,
there are an extremely wide range of marine environments where speakers may be
placed. FUSION Full Range Marine Speakers are optimised to perform in the widest possible
range of mounting locations, but a little thought and care with placement will always be
rewarded with better sound.
• Highfrequenciesaredirectional.Placingthespeakerslowdownintheboatwilllose
some of this information. (To improve dispersion of the high frequencies, the grille on
your FUSION Full Range Speaker has a uniquely designed “phase correction” feature in
the centre, for best performance with the grille on.)
• Speakersshouldbeplacedtosimulatea“soundstage”,bybeingplacedwhereyouare
able to hear both speakers in a stereo situation.
• Bassisdependantontheareabehindthespeaker.Toosmallanareawillrestrictbass,
too large will compromise bass performance.
• Placingaspeakersuchthatitisveryclosetoanopenarea(wheresoundfromthe
back of the loudspeaker has a very short path to compete with sound from the front
of the loudspeaker) produces the least bass.
• Ifpossible,tryandmaketheareabehindaspeakeranenclosure.
Where the speaker is directly exposed to the outside environment, it is best if this is
a sealed enclosure. (Especially if the loudspeaker is exposed to “wash down”, as a vent
might allow water to collect in the enclosure.)
Where the speaker is not so exposed (an inside cabin for instance), a better bass
performance can be had if the enclosure is a ported or vented type. To help you achieve
the best possible result see the optimum enclosure design recommendations. These are
by volume only, and for the ported option, an optimum vent size/length is given.
008
Installation Guide
009
Installation Tips
Grille, Twist
Into Position
Stainless
Screws
Speaker
Mounting
Gasket
Mounting
Surface
www.busse-yachtshop.de | info@busse-yachtshop.de
5

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Fusion MS-FR602 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Fusion MS-FR602 in de taal/talen: Engels als bijlage per email.

De handleiding is 4,65 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info