691951
8
Verklein
Vergroot
Pagina terug
1/12
Pagina verder
General Settings
Select > SETTINGS.
NOTE: When a check box is selected, the option is on. When
the box is clear, the option is off.
NOTE: Some options are specific for the optional remote
control, such as the on the FUSION MS-NRX200i/300. See the
remote control owner's manual for more information.
ZONE: Enables you to configure the speaker zones.
ZONE > TONE: Adjusts the bass, middle, and treble tones.
LCD: Sets the brightness and contrast of the optional remote
control.
POWER SAVE: Enables and disables the backlight power-save
feature on the optional remote control.
KEY SOUND: Enables and disables the sound on the optional
remote control.
NMEA MONITOR: Sets the data to view, the data display cycle,
and the units of measure for NMEA 2000
®
data displayed on
the optional remote control.
LANGUAGE: Sets the language used on the optional remote
control.
TUNER REGION: Sets the region used by the FM, AM, or DAB
source.
TEL/MUTE: Sets the behavior of the mute wire. The device can
either mute the audio or switch to the AUX input when the
optional mute wire is activated.
SET DEVICE NAME: Assigns a name to a connected stereo.
STEREO: Assigns the remote control to a connected stereo.
UPDATE: Updates the connected stereo, remote control, or
accessory.
UPDATE > FACTORY RESET: Resets the connected stereo
settings to factory default values.
ABOUT: Shows the installed software version.
More Information
Registering Your FUSION MS-BB100
Help us better support you by completing our online registration
today.
Go to www.fusionentertainment.com.
Keep the original sales receipt, or a photocopy, in a safe
place.
Troubleshooting
The stereo does not appear on the NMEA 2000
network or is unresponsive
You must connect the stereo to the included wired remote
control for the stereo to function properly. Connect the
included remote control if it is not already installed.
Check the NMEA 2000 cables and connectors to make sure
they are installed properly. A properly constructed NMEA
2000 network must be connected to power and must contain
backbone terminators.
Turn off the power to the stereo for two minutes to reset the
stereo.
The stereo keeps locking up when connected to an
Apple device
Press and hold the power button to reset the stereo.
Reset the Apple device. Go to www.apple.com for more
information.
Make sure you have the latest version of iTunes
®
and the
latest operating software on your Apple device.
The stereo is not finding my connected Apple device
Make sure you have the latest version of iTunes and the
latest operating software on your Apple device.
Make sure you have the latest version of the FUSION-Link
application on your Apple device.
Reset the Apple device.
Go to www.apple.com for more information.
Contact your FUSION dealer or send an email to FUSION
from www.fusionentertainment.com.
My Bluetooth audio is interrupted by short breaks
Ensure the media player is not covered or obstructed.
Bluetooth technology performs best with line-of-sight
operation.
Bring the media player within 10 m (33 ft.) of the stereo.
Turn off the DISCOVERABLE setting after pairing a
Bluetooth device to the stereo.
The stereo does not display all song information from
my Bluetooth source
The availability of song information such as song title, artist
name, track duration, and album cover artwork depends on the
capability of the media player and music application.
Album cover artwork and shuffle and repeat status icons are not
supported by Bluetooth technology.
Software Updates
For best results, you should update the software in all FUSION
devices at the time of installation to ensure compatibility.
Go to www.fusionentertainment.com/marine to download the
latest software. Software updates and instructions are available
on your device product page.
Specifications
Specification Measurement
Dimensions (black box stereo)
(W × H × D)
Approximately 155 mm (6.10 in.) ×
60 mm (2.63 in.) × 94 mm (3.70 in.)
Water resistance (black box
stereo)
IEC 60529 IPX3
Water resistance (remote
control)
IEC 60529 IPX7 (front), IEC 60529
IPX3 (rear)
Operating temperature From 0 to 50°C (from 32 to 122°F)
Storage temperature From -20 to 70°C (from -4 to
158°F)
Input voltage From 10.8 to 16 Vdc negative
ground
Fuse rating 15 A
NMEA 2000 LEN 1 (50 mA)
ANT wireless range Up to 3 m (10 ft.)
Compass-safe distance 15 cm (5.91 in.)
Pre-output voltage 3 V peak
Current (standby) less than 15 mA
Current (max.) 15 A
Output music power per
channel
50 W
Total output music power 200 W
Speaker impedance 4 Ohm per channel
Total harmonic distortion (1 W
output, 4 ohm load, from 20 Hz
to 20 kHz)
0.04 typical
Less than 0.1% max.
4 General Settings
8

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Fusion MS-BB100 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Fusion MS-BB100 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,92 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Fusion MS-BB100

Fusion MS-BB100 Gebruiksaanwijzing - Nederlands - 12 pagina's

Fusion MS-BB100 Gebruiksaanwijzing - Deutsch - 12 pagina's

Fusion MS-BB100 Gebruiksaanwijzing - Français - 12 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info