101589
47
Verklein
Vergroot
Pagina terug
1/51
Pagina verder
9392
Frame erase does not
erase the frame.
The ERASE ALL
function does not erase
all the frames.
Nothing happens when I
use the Mode dial.
Screens are not
displayed in English.
There is no image on
the TV.
The TV image is black
and white.
When the camera is
connected to a PC, the
photographed image or
playback image appears
on the camera’s screen.
The camera no longer
works correctly.
Can’t print with
PictBridge.
The camera was
connected to PC when
the USB mode was set
to “
®
”.
Some frames may be protected.
i Camera malfunction.
i The batteries have run out.
i A language other than English is selected
in the “ ” setting in the “SET-UP”
menu (P.60).
i The camera is not connected to the TV
correctly.
i “TV” is selected as the TV input.
i The video output setting is incorrect.
i The video output setting is incorrect.
i The USB cable (included) is not correctly
connected to the PC or camera.
i The PC is not turned on.
The camera has suffered an unforeseen
problem.
®
” is not selected in USB mode in the
“SET-UP” menu.
Unprotect frames using the camera on
which the protection was first applied.
i Briefly remove the batteries or disconnect
the AC power adapter. Then reload the
batteries or reconnect the AC power
adapter and try again.
i Load new or fully charged batteries.
1Press the “MENU/OK” button to display
the menu on the screen.
2Press “d” or “c” to select “
F
” and press
a” or “b” to select “SET-UP”. Press the
“MENU/OK” button to display the SET-UP
screen on the screen.
3Press “d” or “c” to move to option 3 and
then use “a” or “b” to select “”.
4Press “d” or “c ” several
times to select “ENGLISH”.
5Press the “MENU/OK” button.
i Connect the camera and TV correctly.
i Set the TV input to “VIDEO”.
i Change the setting to “NTSC” or “PAL”
(P.60).
i Change the setting to “NTSC” or “PAL”
(P.60)
i Set up the camera and the USB cable
(included) correctly.
i Turn the PC on.
Briefly remove the batteries or disconnect
the AC power adapter. Then reload the
batteries or reconnect the AC power adapter
and try again. If the message still appears,
contact your FUJIFILM dealer.
Select “
®
” in USB mode in the “SET-UP”
menu.
Perform steps 1 to 3 to remove the
camera from PC.
h Windows
1 The “New Hardware Found” wizard (or
“Scanner and Camera” wizard) appears.
If the wizard does not appear, proceed to
step 3.
2 Click the [Cancel] button.
3 Disconnect the camera from the PC.
h Macintosh
1 The window for locating the driver
appears. If the window does not appear,
proceed to step 3.
2 Click the [Cancel] button.
3 Disconnect the camera from the
Macintosh.
Troubleshooting
eIf you think the camera is faulty, check the following once more.
Troubleshooting Possible causes Solutions
Specifications
System
Model Digital camera FinePix S3100 / FinePix S3500
Effective pixels 4.0 million pixels
CCD 1/2.7 inch square pixel CCD
Number of total pixels: 4.23 million pixels
Number of recorded pixels Still image: 2272 × 1704 pixels/1600 × 1200 pixels/1280 × 960 pixels/
640 × 480 pixels (
4
/
2
/
1
/
`
)
Movie: 320 × 240 pixels (10 frames per second without sound)
160 × 120 pixels (10 frames per second without sound)
Storage media xD-Picture Card (16/32/64/128/256/512 MB)
File format Still image: JPEG (Exif ver. 2.2)
Design rule for Camera File System compliant DPOF compatible
Movie: AVI format, Motion JPEG
Lens Fujinon 6 × optical zoom lens, F2.8-F3.0
Aperture F2.8 to F3.0 (automatically selected)
Focal length f=6.0 mm to 36 mm
(Equivalent to 39 mm to 234 mm on a 35 mm camera)
Focal range Normal: Approx. 0.8 m (2.6 ft.) to infinity
Macro: Approx. 0.1 m (3.9 in.) to 0.8 m (2.6 ft.)
Shutter speed 2 sec. to 1/1500 sec. (combined with mechanical shutter)
Focus TTL contrast-type, Auto focus
Sensitivity Equivalent to ISO 100 (automatically set between ISO 64 – 250 depend on
the shooting mode and subject.)
Photometry TTL 64-zones metering
Exposure control Program AE
Exposure compensation –2.1 EV to +1.5 EV in 0.3-step increments (in Manual mode)
White balance Auto (
B), Scene position (m)
Manual modes, 7 positions can be selected
Viewfinder 0.33 inches 110,000 pixels electronic viewfinder
NTSC Approx. 88% coverage PAL Approx. 86% coverage
LCD monitor 1.5 inches, 60,000 pixels amorphous silicon TFT,
NTSC: Approx. 87% coverage, PAL: Approx. 85% coverage
Flash type Auto flash using flash control sensor
Effective range:
Wide-angle: Approx.
0.8
m to 3.5 m (
2.6
ft. to 11.5 ft.)
(Approx. 0.3 m to
0.8
m (1.0 ft. to
2.6
ft.): Macro)
Telephoto: Approx. 0.8 m to
3.5
m (2.6 ft. to
11.5
ft.)
Flash modes: Auto, Red-Eye Reduction, Forced Flash, Suppressed Flash,
Slow Synchro
, Red-Eye Reduction + Slow Synchro
In Manual mode
Self-Timer 10 sec.
Video output NTSC/PAL selectable
Input/Output Terminals
Video output socket
2.5 mm dia. jack
(USB) socket
For file transfer to a computer
DC Input
Socket for specified AC power adapter AC-5VH/AC-5VHS (sold separately)
47

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Fujifilm Finepix S3100 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Fujifilm Finepix S3100 in de taal/talen: Engels als bijlage per email.

De handleiding is 4,69 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info