610559
7
Verklein
Vergroot
Pagina terug
1/8
Pagina verder
www.foodsaver.com 1-877-777-8042 www.foodsaver.com 1-877-777-8042

11 12
1. Prepare container according to FoodSaver
®
Accessory Guidelines.
2. Insert one end of Accessory Hose into Accessory
Port on appliance. Insert other end into port on
accessory. Twist tab on Accessory Hose while
inserting to ensure a tight fit.
3. Close lid, rotate Latch, press Vacuum & Seal
Button.
4. When motor and Indicator Light turn off, vacuum
process is complete. Note that the appliance
will still go through sealing cycle even when
vacuuming an accessory. You will hear Motor
shut off and then the sealing cycle will begin.
5. Gently twist and remove Accessory Hose from
accessory and appliance.
6. To test vacuum, simply tug on accessory lid. It
should not move.
Note: For important tips on using accessories with
different foods, please refer to the FoodSaver
®
Reference Guide.
How to
Vacuum Package with FoodSaver
®
Accessories
FoodSaver Vacuum Packaging Canisters (without
large knob on lid)
To release vacuum and open, push gray rubber
button on lid.
FoodSaver Bulk Canisters and Quick Marinators
(with large knob on lid) and Universal Lids.
To release vacuum and open, turn knob on lid to
Open.
FoodSaver Jar Sealer with Mason Jars
For use with Ball
®
and Kerr
®
brand Mason jars.
Important: Do NOT use screw bands when vacuum
packaging jars. To open, wedge spoon between
Mason jar lid and highest part of threaded rim.
Twist spoon gently to release vacuum.
FoodSaver Bottle Stoppers
To release vacuum and open, twist and pull up
on Bottle Stopper.
How to
Open FoodSaver
®
Accessories after Vacuum Packaging
To Clean Appliance:
Remove Power Cord from electrical outlet. Do not immerse in liquid.
Check Gaskets and around Drip Tray to make sure they are free from food
materials. Wipe off Gasket with warm soapy cloth if needed. Upper and
Lower Gaskets may be removed for cleaning. Clean with warm, soapy water.
The Removable Drip Tray makes cleanup easy when small amounts of
liquids are inadvertently pulled into the Vacuum Channel during vacuum
process.
Empty Drip Tray after each use. Wash in warm soapy water or place in top
rack of dishwasher. Dry thoroughly before re-inserting into the appliance.
Always leave lid latch in open position. Never store lid in latched position
as gaskets may become compressed. When appliance is left in closed
position, the Gaskets become compressed and the unit may not function
properly.
Care and Cleaning
Remove All Food
Around Gaskets
Lift Drip Tray Out

Problem
Solution
Red Seal LED Flashing Unit is overheated. Always allow 20 seconds between seals. Under heavy
usage, appliance will shut off automatically and Red Light will flash. Wait for
20 min. for unit to cool off.
• Always wait 20 seconds between seals.
Latch has been left closed position: Gaskets may be compressed. Unlatch and
allow 10 to 20 minutes for Gaskets to expand.
Vacuum pump running more than 120 seconds. Under heavy usage, appliance
will shut off automatically and Red Light will flash. See next section Vacuum
Pump is running, but bag is not evacuating.
Vacuum Pump is
running, but bag
is not evacuating
If making a bag from a roll, make sure one end of bag is sealed. See How to
Make a Bag from a FoodSaver
®
Vacuum Sealing Roll.
Adjust the bag and try again. Make sure the open end of the bag in down
inside the vacuum channel.
Check for wrinkles in bag along Sealing Strip. To prevent wrinkles in the seal,
gently stretch bag flat while inserting bag into Vacuum Channel.
Open unit and make sure Gaskets are inserted properly and there are no
foreign objects, dirt or debris on the Upper or Lower Gasket (See Care and
Cleaning).
Latch has been left closed position: Gaskets may be compressed. Unlatch and
allow 10 to 20 minutes for Gaskets to expand.
• Make sure the accessory hose is not attached to accessory port.
Make sure the lid is latched down all the way. If the Latch does not catch the
lid and bring it down, there will be a leak between the Gaskets.
Gasket is loose or has
a tear
Take out the gasket, clean it and reinsert the Gasket into the Vacuum Channel
(See Care and Cleaning).
• Call 877-777-8042 or visit website for replacement.
Bag is not sealing
properly
• Too much liquid in bag, freeze before vacuuming.
Check for food debris around seal area. If present, Take out the gasket, clean
it and reinsert the Gasket into the Vacuum Channel (See Care and Cleaning).
Bag has wrinkles: To prevent wrinkles in the seal, gently stretch bag flat while
inserting bag into Vacuum Channel.
No lights on the
control panel
• Make sure unit is plugged in.
• Make sure wall outlet is functional.
• Make sure lid is all the way down, and the Latch is in the locked position.
Trouble-Shooting
7

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw FoodSaver V2200 series bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van FoodSaver V2200 series in de taal/talen: Engels als bijlage per email.

De handleiding is 2,18 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info