610571
2
Verklein
Vergroot
Pagina terug
1/2
Pagina verder
Note: FoodSaver Jar Sealers can only be used with a FoodSaver
®
appliance that has an Accessory Port.
Please check your QuickStart Guide to see if your machine has one.
1. Place the FoodSaver
®
appliance on a flat, dry surface and plug the power cord into a standard
electrical outlet.
2. Place the item(s) to be vacuum packaged inside the Mason jar. Leave at least one inch (1”) between
the contents and the rim of the jar.
3. Wipe the rim to ensure it is clean and dry.
4. Place the Mason jar lid on the top of the Mason jar. (You will not need the screw band section of the
Mason jar lid. It is not used when vacuum packaging.) Push down firmly until the Jar Sealer covers the
entire rim of the jar.
5. Insert one end of the Accessory Hose into the Accessory Port on the FoodSaver
®
appliance.
6. Insert the other end of the Accessory Hose into the hole at the top of the Jar Sealer. Twist the gray tip
of the hose while inserting to ensure a tight fit.
5. Follow the steps for vacuum packaging as outlined in your QuickStart Guide.
Remember to remove the Accessory Hose from the Accessory Port on the appliance before vacuum
packaging in FoodSaver
®
Bags. Remove the hose by gently twisting the gray fitting while pulling it out.
How to Open a Mason Jar
To open a Mason jar, wedge a spoon between the Mason jar lid and the highest part of the threaded
rim. Twist the spoon gently to release the vacuum. When opened this way, the Mason jar lid can be
reused many times.
Care and Cleaning Instructions
1. FoodSaver
®
Jar Sealers should be washed in warm water using a mild dishwashing soap. Jar Sealers
are not dishwasher safe.
2. Dry thoroughly before using.
3. FoodSaver
®
Jar Sealers may not be washed in the dishwasher.
Troubleshooting
If the Mason jar will not vacuum.
1. Make sure the Jar Sealer is centered and pressed firmly over the lid of the Mason jar.
2. Make sure the rubber gasket on the Mason jar lid is free from food materials, crumbs, etc.
3. Make sure the rim of the Mason jar does not have any cracks or scratches. Any gaps can prevent a
vacuum from forming.
4. Make sure the Mason jar is not too full for vacuum packaging. Always leave at least one inch (1”)
between the contents and the lid.
5. Make sure the metal lid of the Mason jar is not bent.
6. Make sure the Accessory Hose is securely inserted into the Accessory Port on the appliance and in the
hole on the Jar Sealer.
Note: To avoid accidents, do not use a knife to remove the Mason jar lid. Also, do not use a bottle opener
to remove the Mason jar lid as it will bend the lid and prevent its reuse. Vacuum packaging is not a
substitute for canning.
If you need assistance:
In the U.S., call Consumer Services at 1-877-777-8042 or email customerservice@foodsaver.com.
In Canada, call 1-877-804-5383.
How to Vacuum Package Using the FoodSaver
®
Jar Sealer with Mason Jars
Printed in China www.foodsaver.com P.N. 143707
SPR-052110
© 2010 Sunbeam Products, Inc. doing business as Jarden Consumer Solutions. All rights reserved. Distributed by
Sunbeam Products, Inc. doing business as Jarden Consumer Solutions, Boca Raton, Florida 33431.
2

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw FoodSaver Jar Sealer bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van FoodSaver Jar Sealer in de taal/talen: Engels als bijlage per email.

De handleiding is 0,39 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info