763957
62
Verklein
Vergroot
Pagina terug
1/88
Pagina verder
287/289
Users Manual
52
softkeys labeled Prev and Next to select an item for deletion.
Next, press the softkey labeled Delete. A message asking to
confirm the deletion will appear before anything is deleted from
memory.
Recording Measurement Data
The Meter’s record feature collects measurement information
over a user-specified duration. This collection of information is
called a recording session. A recording session is made up of
one or more measurement records. Each record contains
measurement summary information covering the duration of the
record.
Each record contains the minimum, maximum, and average
value detected over the record’s duration. In addition to
measurement values, time stamps are also captured and saved
with each record. The time stamps consist of the record start
time, the time the maximum value was detected, the time the
minimum value was detected, and the record end time.
Some of a records data can be viewed through the Meter’s
Viewing Trend Data function. Viewing all the data that makes up
a record can only be viewed on a PC running FlukeView Forms
software.
There are two measurement record types that are captured
during a recording session: interval and event. An interval record
covers a user-specified interval. An event record has a duration
determined by the activity of the measured signal and can
interrupt an interval record. Even if an interval record is
interrupted, a record will end and a new interval record will begin
when the scheduled interval time expires.
Event records are triggered by the measured signal varying more
than an adjustable percentage of the value measured at the start
of the record. This adjustable percent is called the Event
Threshold for recording. In addition to the values and time
stamps mentioned above, an event record also stores whether
the signal was stable or unstable during the event record
duration. To be classified as stable, the measured signal’s value
must stay within the selected percentage of the start value for at
least one second. Measured signals that exceed the percentage
threshold in less than one second are classified as unstable. See
the “Setting the Event Threshold Value” section later in this
manual.
Note
For temperature measurements, the AutoHold
threshold is a percent of 100 degrees. The default
AutoHold threshold is 4% of 100 degrees, or 4 degrees
Celsius or Fahrenheit.
A record ends when one of the following occurs:
The start of a new interval record.
A range overload, causing the Meter to change range.
A non-ranging overload, when in manual range or the
highest range.
The measured value changes more than 4 % of the
measured value at the start of the record.
The recording session terminates.
A recording session termination can be caused by one of the
following:
62

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Fluke 289 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Fluke 289 in de taal/talen: Engels als bijlage per email.

De handleiding is 2,15 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Fluke 289

Fluke 289 Gebruiksaanwijzing - Nederlands - 90 pagina's

Fluke 289 Gebruiksaanwijzing - Deutsch - 92 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info