763957
58
Verklein
Vergroot
Pagina terug
1/88
Pagina verder
287/289
Users Manual
48
Setting Date and Time
The Meter’s internal clock is used in the display and for time-
stamping recorded measurements. To change the date and time
as well as the display format, press the softkey labeled Setup.
Position the menu selector next to the menu item labeled
Display. To set the date and time, press the softkey labeled
Date/Time to open the date/time menu. Next, position the menu
selector next to either the Set Date item or Set Time item and
press the softkey labeled Edit. Using 5 and 6, position the cursor
on the date or time element to adjust. Use 7 and 8 to change
the selected date or time element value. Press OK to complete
the action.
Setting Backlight and Auto Off Timeouts
The Meter’s backlight and auto off features use timers to
determine when to turn off the backlight, when to automatically
turn the Meter off or enable the battery saver mode. To set these
timeouts, press the softkey labeled Setup and position the menu
selector next to the menu item labeled Instrument. Position the
menu selector next to the menu item labeled Auto Backlight
Timeout or Auto Power Off and then press the softkey labeled
Edit. Use 7 and 8 to adjust the time to one of the preset
values. Press OFF to disable the timeout feature. Press the
softkey labeled OK to set the selected time. Press the softkey
labeled Close to return to normal Meter operation.
The battery-saver mode is used when the Meter is performing a
recording session or during MIN MAX, Peak record and
AutoHold. The battery-saver mode powers down circuits that are
not involved in the operation of these recording sessions,
including the display. For the record mode, the timeout period is
set to five minutes and is enabled only when the Auto Power Off
timeout is set to a value other than Off. For MIN MAX, Peak, and
AutoHold, the timeout is the time period set for Auto Off.
Setting a Custom dBm Reference
To add a custom dBm reference value, press the softkey labeled
Setup and position the menu selector next to the menu item
labeled Instrument. Next press the softkey labeled Instrument
and position the menu selector next to the menu item labeled
dBm Reference. Next, press the softkey labeled Edit. Use 5 and
6 to position the cursor on a specific digit. Press 7 and 8 to
increment or decrement the digit. With the desired reference
displayed, press the softkey labeled OK to add this value to the
dBm reference list. Only one custom value is allowed. Press the
softkey labeled Close to return to normal Meter operation.
Disabling and Enabling the Beeper
The Meter’s beeper alerts users to the presence of messages,
operator errors such as incorrect lead connections for the
selected function, and newly sensed values for MIN MAX and
Peak recording. Although the beeper is also used for the
continuity function, controlling the beeper for that function is not
done through this setup option. See the “Testing for Continuity”
section for information on the continuity beeper.
To enable or disable the Meter’s beeper, press the softkey
labeled Setup and position the menu selector next to the menu
item labeled Instrument. Next press the softkey labeled
Instrument and position the menu selector next to the menu
item labeled Beeper. Press the softkey labeled Edit to move the
cursor to the on or off selection. Use 7 and 8 to switch the
beeper on or off. The status of the beeper is indicated in the
display’s status bar (see item 12 in Figure 2).
58

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Fluke 289 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Fluke 289 in de taal/talen: Engels als bijlage per email.

De handleiding is 2,15 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Fluke 289

Fluke 289 Gebruiksaanwijzing - Nederlands - 90 pagina's

Fluke 289 Gebruiksaanwijzing - Deutsch - 92 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info