630790
29
Verklein
Vergroot
Pagina terug
1/34
Pagina verder
29
GB
Run the machine at walking pace, in
strips that are a straight as possible.
For seamless mowing, the strips should
always overlap by a few centimetres.
On slopes, always work across the
slope.
For the rst cut of the season, choose
a high the cut height and reduce the
height to around 20 mm for the subse-
quent cuts.
Cleaning and
Maintenance
Have work that is not de-
scribed in these instructions
carried out by one of our
authorised customer service
centres. Use only original
components. The following
states how damage to the
trimmer and possible injury
to people can be avoided.
Wear gloves when dealing with the
blades. Risk of cuts.
Check covers and safety devices for
damage and check that these are sitting
correctly. Replace if necessary.
Cleaning
Neither hose down nor use running
water to clean the mower.
Always keep the machine clean. For
cleaning, use a brush or cloth, but no
cleaning agents or solvents.
After mowing, remove any plant
remains stuck to the wheels and the
blade area.
Rub the blades with an oil rag or spray
them with a metal maintenance spray.
Due to the special cutting geometry,
the blade cylinder blades cannot be
re-sharpened. If necessary, the blade
cylinder and sub-blade must therefore
be replaced as a set. Have a specialist
workshop carry out the installation of
the blade cylinder.
Adjusting the Cutting
Clearance
The blade cylinder blades must be ad-
justed if the grass is no longer being cut
evenly and cleanly.
1. Remove the machine key (3) and
metal strips (feeler gauge) (4) from
the machine holder (cf.
5).
2. Push the metal strip (4) between a
blade cylinder (8) blade and the
sub-blade (11).
3. Turn the hex bolts (10) to the right
then to the left on the machine,
in small steps in the clockwise
direction until the metal strip sticks
slightly.
4. Check the setting by turning the
blade cylinder. None of the blade
cylinder blades should be in
contact and grinding on the sub-
blade.
5. Return the machine key (3) and
the metal strip (feeler gauge) (4) to
the tool holder (cf.
5).
If it is no longer possible to adjust
the cutting clearance, the blade
cylinder and sub-blade must be re-
placed as a set.
29

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Florabest FHM 38 A1 - IAN 79826 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Florabest FHM 38 A1 - IAN 79826 in de taal/talen: Nederlands, Duits, Engels, Frans als bijlage per email.

De handleiding is 2,55 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info