4.Charging
You will hear a reminder sound when the battery is low. At the same time, the LED
light will turn red on the earbuds. Place the earbuds inside the docking case and
close the lid. During charging, the LED light turns red (to check open the lid a little
bit to see the leds working), and it switches off automatically when it is fully
charged.
If both earbuds are empty and also the docking case, please re-charge the
docking case at first with the micro usb charge cable. The docking case will be
charged firstly (led with flash 1,2,3 till 4 leds all will ON 1 by 1 till full) and when full it
will automatically charge the earbuds till full (led will be ON from 4, 3, 2 till 1 led 1
by 1 till empty) and then switch auto off.
Note: the earbuds will be switched off automatically during charging.
Warning:
1. Do not use the earbuds excessively and do not store them under heavy
pressure. The earbuds are not resistant to heat and water.
2. Keep the earbuds away from the WIFI router or other high-frequency
equipment and walls etc. to prevent interruption of signal reception.
3. Use the earplugs in working range (max. 10 meters). The effect will be
significantly better if there are no obstacles between the connected devices.
4. Use these Bluetooth earphones with any device with Bluetooth stereo function.
5. Do not press the earbuds too hard into the charging station if you want to
charge them! A soft "magnetic click" indicates that they have been placed
correctly. The LED light turns red when charging starts.
6. When using the earbuds again, please keep them upright when you remove
them from the charging station to prevent damage.
Highlights
1.Dust-proof mesh
2.Multifunctional button
3.Microphone
