456443
4
Verklein
Vergroot
Pagina terug
1/20
Pagina verder
40069 Zola Predosa (BO) - ITALY
info@finicompressors.it
- GB -
Dear Customer,
thank you for choosing our product. In order to get the best performances in the use of this product, please
read carefully this manual.
To avoid incorrect operation of the equipment and possible physical risk to the operator, please read and
strictly follow the instructions contained in this manual. Note, these instructions are in addition to the safety
rules that apply in the country where the dryer is installed.
Before packing for shipment each ARTIC 134/EVO series refrigerated air dryer is subjected to a rigorous
test to ensure the absence of any manufacturing faults and to demonstrate that the device can perform all
the functions for which it has been designed.
Once the dryer has been properly installed according to the instructions in this manual, it will be ready for
use without any further adjustment.
The operation is fully automatic, and the maintenance is limited to few controls and some cleaning
operations, as detailed in the following chapters.
This manual must be maintained available in any moment for future references and it has to be
intended as inherent part of the relevant dryer.
Due to the continuous technical evolution, we reserve the right to introduce any necessary change without
giving previous notice.
Should you experience any trouble, or for further information, please do not hesitate to contact us.
IDENTIFICATION PLATE
Model
Serial No.
Nominal Flow Rate
Max Air Pressure
Max Inlet Air Temperature
Ambient Temperature
Refrigerant
Refrigerant Design Pres. HP/LP
Electric Supply
Electric Nominal Power
Fuse Max.
Manufactured
The product identification plate,
on the back of the dryer, shows
all the primary data of the
machine.
These data must always be
referred to the manufacturer or
to the dealer when information
or spares are needed, even
during the warranty period.
The removal or the alteration of
the identification plate will void
the warranty rights.
Model
Serial No.
Nominal Flow Rate
Max Air Pressure
Max Inlet Air Temp.
Ambient Temp.
Refrigerant
Refrig. Design Pres.
HP/LP
Electric Supply
Electric Nominal Power
Fuse Max.
Manufactured
Nl/min
barg
°C
°C
type/kg
barg
ph/V/Hz
W/A
A
www.finicompressors.com
BOLOGNA - ITALY
40069 - ZOLA PREDOSA
FINI S.p.A.
Fini
COMPRESSORS
WARRANTY CONDITIONS
For 12 months from the installation date, the warranty covers eventual faulty parts, which will be repaired or
replaced free of charge, except the travel, hotel and restaurant expenses of our engineer.
The warranty doesn’t cover any responsibility for direct or indirect damages to persons, animals or
equipment caused by improper usage or maintenance, and it’s limited to manufacturing faults only.
The right to warranty repairs is subordinated to the strict compliance with the installation, use and
maintenance instructions contained in this manual.
The warranty will be immediately voided in case of even small changes or alterations to the dryer.
To require repairs during the warranty period, the data reported on the identification plate must be notified.
4

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Finicompressors Artic 134-EVO luchtdroger bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Finicompressors Artic 134-EVO luchtdroger in de taal/talen: Engels als bijlage per email.

De handleiding is 1,04 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info