574902
13
Verklein
Vergroot
Pagina terug
1/77
Pagina verder
TXS
13
GB
Protect the battery pack from excessive heat > 50
°C or constant heat sources such as sunlight or
naked flames!
Never use water to extinguish burning li-ion bat-
tery packs! Use sand or a fire blanket.
Check the plug and the cable regularly and
should either become damaged, in order to avoid
a hazard, have them replaced by an authorised
after-sales service workshop.
– Always pull the mains plug out of the socket
when the charger is not in use.
2.4 Emission levels
Levels determined in accordance with EN 60745 are
typically:
Vibration emission value a
h
(vector sum for three
directions) and uncertainty K measured in accor-
dance with EN 60745:
The specified emissions values (vibration, noise)
are used to compare machines.
They are also used for making preliminary esti-
mates regarding vibration and noise loads during
operation.
They represent the primary applications of the
power tool.
Increase possible for other applications, with other
insertion tools or if not maintained adequately. Take
note of idling and downtimes of machine!
3 Intended use
Cordless drill suitable
for screwing in and tightening screws,
for drilling in metal, wood, plastics and similar
materials.
Not intended
for clamping tools other than drills
and drill bits, e.g. compass saws, stirring rods,
metal brushes.
Charger MXC suitable
for charging the listed battery packs.
only for indoor use.
The user is liable for improper or non-in-
tended use; this also includes continuous in-
dustrial operation.
4Technical data
* Speed specifications with fully charged battery
pack.
Further technical data on the charger and the
supplied battery pack can be found on page 6.
5 Machine features
The specified illustrations appear at the beginning
of the Operating Instructions.
6Operation
6.1 Changing the battery pack [2]
Battery pack is ready for use immediately upon
delivery and can be charged at any time.
Sound pressure level L
PA
= 65 dB(A)
Sound power level L
WA
= 76 dB(A)
Uncertainty K = 3 dB
Wear ear protection.
Fastening a
h
=4,0 m/s
2
K = 1,5 m/s
2
Drilling in metal a
h
=3,0 m/s
2
K = 1,5 m/s
2
Cordless drills TXS
Motor voltage 10,8V
Idle engine speed* 1st gear 0 - 430 rpm
2nd gear 0 - 1300 rpm
Max. torque
soft/hard screw joints 10/ 16 Nm
Adjustable torque 0,2 - 2,4 Nm
Chuck clamping range 1 - 10 mm
Drill diameter max.
Wood/Metal 12/ 8 mm
Tool holder in drill spindle 1/4 ’’
Weight without battery pack with
Centrotec
0,7 kg
[1-1]
Drilling symbol
[1-2]
Torque thumbwheel
[1-3]
Torque/drilling position marking
[1-4]
Gear switch
[1-5]
Right/left switch
[1-6]
On/Off switch
[1-7]
Belt clip
[1-8]
Insulated gripping surfaces (grey shaded
area)
[1-9]
Button for releasing the battery pack
[1-10]
LED lamp with capacity indicator
[1-11]
Bit store
[3A]
Wall mount for charger
13

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Festool TXS Li 2.6-Plus bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Festool TXS Li 2.6-Plus in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans, Pools, Deens, Zweeds, Noors, Fins als bijlage per email.

De handleiding is 21,26 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info