778613
25
Verklein
Vergroot
Pagina terug
1/188
Pagina verder
26
ellery, bracelets, watches, etc., that may get
caught in the moving parts. For work in an open
area we recommend wearing rubber gloves
and work boots with anti-slip soles. If your hair
is long, protect it with a net.
- Use only those accessories or special equip-
ment that are offered for the machine by the
manufacturer.
- All repairs must be performed only by an au-
thorised service centre by properly qualifi ed
personnel, using original replacement parts.
The warranty does not cover any damages
caused by the use of any inappropriate parts.
5.3 Residual risks
Even if the machine is used to specifi cation and
all relevant safety regulations are followed, the
following residual safety risks may nonetheless
occur due to the design of the machine and its
usage:
- Injury from the cutting teeth when replacing
the chain.
- Injury from touching the chain on its cutting
area.
- Catching clothes in the moving chain.
- Injury from fl ying scraps or parts of the ma-
chine.
- Danger that may be caused by the portable cord.
- Kickback caused by the chain or the operating
the tip of the plate jamming.
- Concentration of sawdust jeopardising health
in poorly ventilated areas.
- Injury from touching electrically charged parts
when dismantling the machine or any part of it
while the machine is still plugged in.
- Hearing damage from prolonged work without
ear protectors.
5.4 Noise / Vibration Information
Measured values determined according to
EN 60745.
Typically the A-weighted noise levels of the tool
are:
Sound pressure level: LPA = 91 dB(A)
Sound power level: LWA = 102 dB(A)
Acoustic output value measured according to es-
tablished guideline 2000/14/EC, appendix VI.
Measured sound power level 102 dB(A)
Uncertainty K = 3 dB
Guaranteed sound power level 104 dB(A)
Evaluation methods for conformity in accordance
with Annex VI. Product category: 6.
Named body:
SLG Prüf- und Zertifi zierungs GmbH
Burgstädter Straße 20
09232 Hartmannsdorf
Germany
CAUTION
Operating noise
Damage to hearing
Use ear protection!
The typical hand-arm vibration is ah = 3 m/s2
Uncertainty K = 2 m/s2
The specifi ed emissions values (vibration, noise)
are used to compare machines.
They are also used for making preliminary es-
timates regarding vibration and noise loads
during operation.
They represent the primary applications of the
power tool.
Increase possible for other applications, with oth-
er insertion tools or if not maintained adequately.
Take note of idling and downtimes of machine!
6 Transport and delivery
The SSU 200 EB sword saw is delivered in perfect,
tested condition, packed in a plastic systainer. The
oil reservoir of the machine SSU 200 EB is not
lled. When the machine is delivered, take it di-
rectly out of the packaging and check for potential
damage during transport. Any damage caused
during transport must be reported to the carrier
immediately.
6.1 Storage
The packed sword saw can be stored in a dry stor-
age area without a heating, where the temperature
does not drop bellow −5 °C. Store the unpacked
saw only in a dry closed storage where the tem-
perature does not drop below +5 °C, and where
sudden temperature changes are prevented.
7 Adjustment
CAUTION
All adjustments and settings must be carried
out before the machine is switched on.
25

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Festool SSU 200 EB - 2021 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Festool SSU 200 EB - 2021 in de taal/talen: Alle talen als bijlage per email.

De handleiding is 11,62 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info