498039
12
Verklein
Vergroot
Pagina terug
1/62
Pagina verder
12
3 Power supply and start-up
Observe mains voltage: the voltage
and frequency of the power source
must correspond to the speci cation
on the machine rating plate.
In North America, only Festool machines
with the voltage speci cations 120 V/60 Hz
may be used.
On/Off switch
Switch (1.5) serves as an On/Off switch
(press = ON, release = OFF). It may be
latched with the locking knob on the side
(1.4) for continuous operation. Pressing the
switch again releases the lock.
4 Machine settings
Always remove the power supply
plug from the socket before carrying
out any work on the machine.
4.1 Electronics
The tool has full-wave electronics
with the following features:
Smooth start-up
The smooth start-up ensures the router
starts up jolt-free.
Speed adjustment
You can regulate the speed steplessly
between 900 and 2500 min
-1
using the
adjusting wheel (1.2). This enables you to
optimise the cutting speed to suit the ma-
terial (see table).
Application
Rotary
control
setting
Working in polish
1
2
Polishing sensitive surfaces (e.g.
painted plastic parts)
3
4
High-gloss polishing
5
6
Constant speed
The pre-selected speed remains constant
whether the machine is in operation or in
neutral position.
Temperature control
To prevent overheating, the safety electro-
nics switches the machine off when it rea-
ches a critical motor temperature. Let the
machine cool down for approx. 3-5 minutes
before using it again. The machine requires
less time to cool down if it is running, i.e.
in neutral position.
Current limiting
Current limiting prevents permissibly high
current consumption under extreme over-
load. This can lead to a decrease in the mo-
tor speed. The motor immediately restarts
after the load is removed.
4.2 Securing polishing attach-
ments
The polishing pads (1.8) are equipped with
an M 14 thread, and are screwed directly
into the spindle (1.9).
You can prevent the spindle from turning
using a size 19 spanner (1.7, not included
in scope of delivery).
Due to the PoliStick system, the polishing
materials (felt, sponge, sheepskin) are
simply pressed onto the polishing pad (1.8)
and held in place by the adhesive coating
on the polishing pad.
4.3 Auxiliary handle
The auxiliary handle (1.6, accessories) can
be screwed onto either the right or left of
the gear head.
5 Working with the machine
For safe guidance, hold the machine with
both hands on the motor housing (1.3) and
on the gear head (1.1) and/or the auxiliary
handle (1.6).
Never overload the tool by using too much
pressure! The best sanding results are
achieved when applying moderate pressu-
re. The sanding performance and quality
depend mainly on the choice of the right
sanding material.
12

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Festool RAP 150.03 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Festool RAP 150.03 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans, Pools, Deens, Zweeds, Noors, Fins als bijlage per email.

De handleiding is 0,45 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info