497581
11
Verklein
Vergroot
Pagina terug
1/68
Pagina verder
CXS
11
GB
5.2 Machine-related safety instruc-
tions
Hold power tool by insulated gripping
surfaces, when performing an opera-
tion where the cutting accessory may
contact hidden wiring or its own cord.
Cutting accessory contacting a "live" wire
may make exposed metal parts of the power
tool "live" and could give the operator an
electric shock.
The charger and power tool are not in-
tended for use by persons (including
children) with limited physical, sensory
or mental ability or without sufficient
experience and/or knowledge, unless
they are supervised by a person re-
sponsible for their safety or have been
instructed on how the charger or power
tool is to be used.
Children should always
be supervised to ensure that they do not
play with the charger or the power tools.
Wear suitable protection:
such as ear
protection, safety goggles, a dust mask for
work which generates dust, and protective
gloves when working with raw materials and
when changing tools.
CAUTION! Rebound!
Rotation: Switch off device immediately!
–Do not lock the on/off switch perma-
nently!
Do not open the battery pack or the charger!
Prevent metal parts (e.g. metal chips) or flu-
ids from entering the charger!
Do not use battery packs or chargers from
other manufacturers!
Protect the battery pack from excessive heat
or constant heat sources such as sunlight or
naked flames!
Never use water to extinguish burning li-ion
battery packs! Use sand or a fire blanket.
– Check the plug and the cable regularly and
should either become damaged, have them
replaced by an authorised after-sales ser-
vice workshop.
Always pull the mains plug out of the socket
when the charger is not in use.
5.3 Emission levels
Levels determined in accordance with EN
60745 are typically:
Vibration emission value a
h
(vector sum for
three directions) and uncertainty K measured
in accordance with EN 60745:
The specified emissions values (vibration,
noise)
are used to compare machines.
–They are also used for making preliminary
estimates regarding vibration and noise
loads during operation.
They represent the primary applications of
the power tool.
Increase possible for other applications, with
other insertion tools or if not maintained ade-
quately. Take note of idling and downtimes of
machine!
6Operation
6.1 Changing the battery pack [2]
L
Battery pack is ready for use immediately
upon delivery and can be charged at any
time.
L
Side of the belt clip
[2-1]
can be replaced
when battery pack is removed.
6.2 Charging the battery pack [3]
The LED
[3-1]
on the charger indicates the
respective operating status of the charger.
Sound pressure level L
PA
= 65 dB(A)
Noise level L
WA
= 76 dB(A)
Uncertainty K = 3 dB
Wear ear protection.
Drilling in metall a
h
=3.0 m/s
2
K = 1.5 m/s
2
Fastening a
h
=4.0 m/s
2
K = 1.5 m/s
2
LED yellow - continuous
light
Charger is ready to use.
LED green - light flashes
quickly
Battery pack is charged to
maximum capacity.
LED green - light flashes
slowly
Battery pack is charged to
80% and with reduced cur-
rent.
11

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Festool Cxs bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Festool Cxs in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans, Pools, Deens, Zweeds, Noors, Fins als bijlage per email.

De handleiding is 9,33 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info