46 Ferm
Random orbital sander
SAFETY AND OPERATING
INSTRUCTIONS
For your own safety and for the safety of others,
please read these instructions carefully before
using this appliance. It will help you understand
your product more easily and avoid unnecessary risks.
Keep this instruction manual in a safe place for future use.
TABLE OF CONTENTS:
1. Machine data
2. Safety instructions
3. Assembly
4. Use
5. Service & maintenance
1. MACHINE DATA
Contents of packing
• Random orbital sander
• 2 Pieces sand paper (grain 120)
• Dust bag
• User manual
• Warranty card
• Safety instructions
Introduction
The Random orbital sander is designated for dry sanding
of surfaces of wood, plastic and filler as well as for painter
surfaces.
Technical specification
Features
Fig. 1
1. On/off switch
2. Handle (behind)
3. Dust bag
4. Ventilating apertures
5. Sandpaper
6. Sanding sole
7. Handle (front)
8. Lock-on button for on/off switch
2. SAFETY INSTRUCTIONS
Explanation of symbols
In this manual and/or on the machine the following
symbols are used:
In accordance with essential applicable safety
standards of European directives
Class II machine – Double insulation – You don’t
need any earthed plug.
Risk of damaging material and/or physical
injuries
Shows presence of voltage
Wear a dust mask
Wear eye protection.
Faulty and/or discarded electrical or electronic
apparatus have to be collected at the appropriate
recycling locations.
Electrical safety
• Always check that the power supply corresponds to
the voltage on the rating plate.
• Immediately throw away old cables or plugs when
they have been replaced by new ones. It is dangerous
to insert the plug of a loose cable in the wall outlet.
• Only use an approved extension cable suitable for
the power input of the machine. The minimum
conductor size is 1,5 mm2. When using a cable reel
always unwind the reel completely.
Specific safety instructions
• Contact or inhalation of dust coming free during
sanding (e.g. lead painted surfaces, woods and
metals), can endanger the health of operator and
bystanders. Always wear appropriate personal
equipment as a dust mask and use the dust bag during
sanding.
• Check that the switch is not in the “ON” position
before connecting the machine to the mains voltage.
• Always keep away the mains lead from moving parts
of the machine.
• When working with the machine, always hold it
firmly with both hands and provide for a secure
stance.
• Use safety glasses, especially when sanding above
your head.
Voltage | 230 V~
Frequency | 50 Hz
Power input | 430 W
No load speed | 10.000/min
Sand paper dimensions | Ø 125 mm
Weight | 2.2 kg
Lpa (Sound pressure level) | 84.2 dB(A)
Lwa (Sound power level) | 97.2 dB(A)
Vibration | 4.0 m/s
2
Ferm 3
,
EN60745-1, EN60745-2-4,
EN55014-1, EN55014-2,
EN61000-3-2, EN61000-3-3
98/37/EEC
73/23/EEC
89/336/EEC
01-06-2004
ZWOLLE NL
W. Kamphof
,
.
CE
ı
(
GR
)
