46 Ferm
CORDLESS POLISHER
THE NUMBERS IN THE FOLLOWING TEXT
CORRESPOND WITH THE PICTURES AT PAGE 2
TECHNICAL SPECIFICATIONS
PACKAGE CONTENTS
The package contains:
1 Cordless polisher
1 Battery
1 Charging adapter
1 Battery holder for the charger
1 Foam applicator pad 4"
1 Buffing pad 6"
1 Scrubbing pad 4"
1 Wool polishing pad 4'
1 Set sanding pads (1pc. coarse, 1 pc medium, 1pc. fine)
1 Users manual
1 Safety instructions
1 Guarantee card
The accessories shown and described in the instructions
for use are not always supplied standard.
INTENDED USE
Note: This product is only intended for light-duty
sanding projects such as minor bodywork, removing
surface rust and preparing metal surfaces for painting.
SAFETY INSTRUCTIONS
The following pictograms appear throughout these
operating instructions:
Risk of damaging material and/ or physical injuries.
Risk of electric shock.
In accordance with essential applicable safety
standards of European directives.
Class II machine – Double insulation – You don’t
need any earthed plug.
Read the instructions.
In case of failure, the transformer is not dangerous.
Thermic protector
Only use indoor.
Cadmium : recyclable material.
Cadmium : do not throw away.
Read through these operating instructions carefully
before using the appliance. Become familiar with the
functions and method of operation. To ensure proper
operation, always maintain the appliance according to
the instructions. The operating instructions and
associated documents should always be kept close to the
appliance.
When using power tools, you must observe the
follwing basic safety precautions in order to ensure
protection from electric shocks, injury and fire.
Read and follow all the instructions before using this
power tool.
Look after the notes on safety.
• Always remove the battery from the appliance,
whenever the appliance is not being used, during
maintenance, and when exchanging accessories or
parts.
• Use the appliance continuously for no longer than 10
minutes. Then give the appliance 10 minutes to cool
down.
IMPORTANT SAFETY NOTES ON CHARGER
AND BATTERY BLOCK
If you come into contact with acid from the battery
block, rinse it off with water immediately. If acid gets
into your eyes, rinse out your eyes at
once with water and contact a doctor immediately!
1. Read and note the operating instructions and safety
notes for the charger and battery block before use!
2. NB! Only use the charger and battery block that
were supplied by the manufacturer - otherwise you
will risk an accident.
3. Protect the charger, battery block and power tool
from moisture, e.g. rain or snow.
4. Always check that all cables are connected correctly
before using the charger.
5. If you discover that a cable is damaged, you should
not use the charger again. Have the damaged cable
replaced immediately.
6. When the charger is not in use, the mains plug should
be removed from the power socket. Do not pull out
the plug by grasping the cable.
