58 Ferm
CIRCULAR TABLE SAW
TECHNICAL SPECIFICATIONS
CONTENTS OF THE PACKAGE
1 Circular tabel saw
1 Extension table
1 Saw blade (assembled)
1 Cam spanner
1 Ring spanner
1 Push stick
1 Rip fence
1 Mitre gauge
1 Instructions
1 Warranty card
Check the machine and accessories for transport
damage.
SAFETY INSTRUCTIONS
The following symbols are used in these instructions for
use:
Denotes risk of personal injury, loss of life or
damage to the tool in case of non-observance of
the instructions in this manual.
Denotes risk of electric shock.
In accordance with the safety regulations of
applicable European guidelines.
Wear eye protection.
Wear hear protection.
Carefully read this manual before using the machine.
Make sure that you know how the machine functions and
how to operate it. Maintain the machine in accordance
with the instructions to make sure it functions properly.
Keep this manual and the enclosed documentation with
the machine.
ELECTRICAL SAFETY
Attention! When electrical tools are used the
following safety measures must be observed against
the danger of electric shock, injury and/or fire. Read
and pay close attention to these recommendations
before using a machine.
Always check that your mains voltage is the same
as the value on the type plate.
When replacing cords or plugs
Throw away cords or plugs as soon as they are replaced
by new ones. It is dangerous to insert the plug of a loose
cord into the wall socket.
When using extension cords
Only use an approved extension cord that is suitable for
the power consumed by the machine. The cores must
have a cross-section of at least 1.5 mm
2
. If the extension
cord is on a reel, unroll the cord completely.
ATTENTION!
When using electric machines always observe the
safety regulations applicable in your country to
reduce the risk of fire, electric shock and personal
injury. Read the following safety instructions and
also the enclosed safety instructions.
Keep these instructions in a safe place!
1. Keep work area clear.
Cluttered areas and benches invite injuries.
2. Consider work area environment.
Do not expose power tools to rain. Do not use
power tools in damp or wet locations. Keep work
area well lit. Do not use power tools in presence of
flammable liquids or gases.
3. Guard against electric shock.
Prevent body contact with grounded surfaces (e.g.
pipes, radiators, refrigerators).
4. Keep visitors away.
Visitors should be kept away from the work area at
all times. Do not let visitors handle the Electric
Rotary Hammer Drill at any time.
5. Store unused tools.
When not is use keep tools out of reach of children.
Store in a dry and secure location.
6. Do not force tool.
Do not apply undue pressure as this may affect
performance and may cause damage to the machine.
Forcing the job also increases the potential for
accidents.
7. Use right tool.
Do not force small tools or attachments to do the
job of heavy duty tool. Do not use a tool for purposes
not intended.
Voltage | 230 V~
Frequency | 50 Hz
Power consumption | 1000 W
| S2 = 30 min
Unloaded speed | 2980/min
Saw blade dimensions | 205x2.4x16 mm
Max. saw capacity 90º | 43 mm
Max. saw capacity 45º | 36 mm
Mitre setting | 0-45°
Weight | 21.5 kg
Lpa (sound pressure) | 73.2 dB(A)
Lwa (sound power level) | 86.2 dB(A)
Ferm 3
