510117
5
Verklein
Vergroot
Pagina terug
1/56
Pagina verder
EN
5
Ferm
TABLE SAW / MITRE SAW
The numbers in the following text correspond
with the pictures at page 2 - 4
Before using the machine, thoroughly
read these instructions for use. Make
sure that you know how the machine
works and how to operate it. Maintain the
machine according to the instructions and
make sure that it works properly. Keep
these instructions for use and the other
documentation with the machine.
Contents
1. Machine information
2. Safety
3. Mounting accessories
4. Operating
5. Service and Maintenance
1. Machine information
Introduction
The bench saw – mitre saw is for sawing wood
and woody pieces of work.
Specifications
Voltage 230 V ~
Capacity 1300 W
Machine class II (double insulated)
Revolutions, not under load 5000 rpm
Saw blade measurement 210 x 30 x 2.6mm
Angle for mitring 45º (left and right)
Angle for bevelling 45º (only left)
Table saw maximum
sawing capacity 30 mm
Mitre saw maximum
sawing capacity:|
- Mitre 0º, Bevel 0º 120 x 60mm
- Mitre 45º, Bevel 45º 90 x 40mm
- Mitre 45º, Bevel 0º 90 x 60mm
- Mitre 0º, Bevel 45º 120 x 40mm
Weight 11.2 kg
Lpa (sound pressure) 94.2+3 dB(A)
Lwa (acoustic capacity 107.2+3 dB(A)
Vibration level <2.5 m/s
2
Vibration level
The vibration emission level stated in this
instruction manual has been measured in
accordance with a standardised test given in EN
61029; it may be used to compare one tool with
another and as a preliminary assessment of
exposure to vibration when using the tool for the
applications mentioned
• using the tool for different applications, or with
different or poorly maintainted accessories,
may significantly increase the exposure level
• the times when the tool is switched off or when
it is running but not actually doing the job, may
signifi cantly reduce the exposure level
Protect yourself against the effects of
vibration by maintaining the tool and its
accessories, keeping your hands warm, and
organizing your work patterns.
Contents of the packaging
1 Table saw / mitre saw
1 Dust bag
1 Parallel guide
1 Flange key for changing the saw blade
1 Socket spanner
1 Allen key
1 Stick for pushing the work
1 Instructions for use
1 Safety instructions
1 Guarantee card
Part names
Figs. 1 to 4
1. On/off switch (cross-cut saw)
2. Operating handgrip
3. Unlocking button
4. Upper bench surface locking screw
5. Dust bag connection
6. Rotary knob for bevelling
7. Scale for bevelling
8. Locking knob
9. Locking knob for setting the mitre angle
10. Scale for bevelling angle
11. Mounting hole
12. Mitre saw surface
13. Guide stop
14. Saw blade protector
15. On/off switch (bench saw)
16. Lower protective hood
17. Guide
18. Upper bench surface
19. Upper saw blade protector
20. Riving knife
21. Flange
22. Saw blade
23. Saw blade bolt
24. Bench inlay
25. Degree arc
26. Clamp screws
27. Flange key
5

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Ferm-MSM1033

Zoeken resetten

  • De zaag is te zwaar belast en daardoor is de zekering doorgebrand. Waar kan ik vinden welk type zekering ik moet hebben en waar ik die kan verkrijgen?
    Gesteld op 16-1-2021 om 22:30

    Reageer op deze vraag Misbruik melden

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Ferm MSM1033 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Ferm MSM1033 in de taal/talen: Nederlands, Duits, Engels, Frans, Spaans als bijlage per email.

De handleiding is 2,51 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info