510133
3
Verklein
Vergroot
Pagina terug
1/48
Pagina verder
EN
3
Ferm
HYDRAULIC JACK
The numbers in the following text refer to the
picture on page 2
For your own safety and that of others, we
recommend that you read this instruction
manual carefully before using this
machine. Keep this instruction manual
and the documentation provided with the
saw for future reference.
Know your apparatus
Before attempting to operate the apparatus,
familiarise yourself with the controls and make
sure you know how to stop it quickly in an
emergency.
Contents
1. Safety instructions
2. Using the apparatus
3. Service & maintenance
Technical specifications
Fig. 1
Lpa Sound pressure level <70dB(A)
1. Safety instructions
Explanation of the symbols
Denotes risk of personal injury, loss of life
or damage to the tool in case of non-
observance of the instructions in this
manual.
Special safety rules
Non-observance of the following instructions can
cause personal injuries and/or damage to the
vehicle.
• Beforejackingupthecar,makesurethejack
is as near to the wheel to be lifted as possible
and as far under the body or any other point of
support as possible.
• Themaximumloadindicatedonthejackmust
neverbeexceeded.
• Thejackmustbeusedasaliftingdeviceonly.
• Alwaysplacethejackonahardandlevel
surface.
• Alwaysprotectthecarfromrollingaway.
Before jack ing up the car, place chocks behind
and in front of the wheels remaining on the
ground, if necessary. Put the car in first gear or
put on the handbrake to further block the car.
• Makesuretoplacethejackinsuchawaythat
your hand is not underneath the car when
jacking it up.
• Makesurethejackisplacedvertical.
• Foryourownsafety,beforeworkingor
crawling underneath the car jack up the car
and support the shafts.
• Beforeusingtheshaftsupportsmakesure
they are in good condition.
• Shouldthepressureinthejackbecometoo
high,excessairwillescapethroughtherelief
valve.Thereliefvalvehasbeensetinthe
factory.
2. Using the apparatus
Assembling the jacking beam
Telescopebothpartsofthejackingbeam,allowing
the flat side to be used when opening and closing
the cock to lower the jack.
Lifting
• Putthecarin‘1’orengagethehandbrake
and block the wheels to prevent the car from
moving.
• Closethecockbymeansofthejackingbeam.
• Instalthescrewjackintherightplace
(indicated by the car manufacturer).
• Insertthejackingbeamintothejackingpoint
and move the jacking beam up and down.
Shaft supports
• Afterjackingupthecartheshaftsupports
should be installed.
• Lowerthecarbyturningthethescrewofthe
release valve anticlockwise, until the car rests
on the supports. Never work under a car which
only rests on the trolley jack.
Lowering
Fig. 1
When you have finished the job, jack up the car
until the jack stands are free. Remove the jack
stands. Using the jacking beam, very slowly and
counterclockwise open the cock referred to under
A.
3. Service & maintenance
Regular maintenance of the hydraulic
jack prevents unnecessary problems.
3

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Ferm JBM1001 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Ferm JBM1001 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans, Pools, Deens, Zweeds, Noors, Fins als bijlage per email.

De handleiding is 1,38 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info