Ferm 05
• Do not use power tools where there is a risk of fire or explosion - i.e. near flammable
liquids or gases.
• Do not allow children into the area where you are working.
• Do not let children or other people touch power tools.
• Do not leave the power tool unattended.
• Store in a dry place well out of reach of children.
• Always use safety glasses and gloves. We also recommend the use of ear protectors.
• Wear the right clothes - not loose fitting or jewellery and ensure garments cannot
come into contact with moving parts.
• If you have long hair, tie it back safely to avoid tangling it in moving parts.
• Before using any power tool, check first for damaged parts and if found do not use it
before the part or parts have been replaced with new ones.
• Do not use power tools when you are tired or have been drinking alcohol.
• Do not force the appliance - let it work at the rate for which it was intended.
• Do not overreach while working - you may lose your balance.
• Never use this appliance without the blade guard fitted. It must always remain fitted.
• Only use spare parts and attachments supplied by Ferm. Use of attachments other
than those supplied or recommended by Ferm will invalidate your guarantee and
could be dangerous.
• Only use this appliance for its intended purpose - trimming hedges and bushes.
• We strongly recommend the use of an RCD (Residual Current Device) of not more
than 30 mA, at the plug socket when using this appliance.
• Only use spare parts and attachments supplied by Ferm. Use of attachments other
than those supplied or recommended by Ferm will invalidate your guarantee and
could be dangerous.
• Do not allow the power cord to lay on or across sharp objects that might pierce the
outer insulation. Carry out a visual inspection of the power cord before use and if it is
damaged, have it replaced by a specialist service centre. Do not use the appliance if
the cord is damaged.
Above all be carefull!
Specific safety warnings
Danger!
• The cutting elements continue to move after the motor is switch off.
• If the cord becomes damaged during use, disconnect the cord from the power supply
immediately. DO NOT TOUCH THE CORD BEFORE DISCONNECTING THE
SUPPLY. Do not use the appliance if the appliance cord or the extension cord are
damaged.
• Keep extension cord away from cutting elements.
• Always ensure the guards are fitted when using the tool.
• Check the cable for damage before starting work and replace if necessary.
UK
D
NL
F
E
P
I
S
SF
N
DK
Ferm
Rengøring
Rengør ofte maskinen med en blød klud, helst hver gang den anvendes. Hold
ventilationsåbningen fri for støv og snavs. Fjern genstridigt snavs med en blød klud, fugtet
i sæbevand. Anvend ikke nogen former for petroleum, alkohol eller amoniak m.m. da
disse typer kemikalier kan beskadige plastikdelene.
Smørelse
Maskinen kræver ingen ekstra smørelse.
Fejl
Skulle en fejl opstå, f.eks. pga. slidtage af en enhed, kontakt venligst serviceadressen på
garantibeviset. På bagsiden af denne manual finder du en tegning med alle dele, der kan
bestilles.
Miljø
For at undgå transportbeskadigelse leveres maskinen i en solid emballage. Emballagen er
så vidt muligt lavet af genbrugsmateriale. Genbrug derfor emballagen.
Defekte og/eller kasserede elektriske eller elektroniske maskiner skal afleveres
på en genbrugsplads.
Garanti
Se venligst garantibetingelserne på garantikortet, som er vedlagt separat.
• Maskinen går rykvis
• Maskinen klipper ikke
• Forlængerledning
beskadiget
• Indvendige ledninger
beskadiget
• Grene for tykke
• Knive sløve
• Efterse ledning og
udskift, hvis beskadiget
• Kontakt servicecenter
• Se specifikationer for
max. klippetykkelse
• Knive udskiftes eller
slibes
84
UK
D
NL
F
E
P
I
S
SF
N
DK
