510080
6
Verklein
Vergroot
Pagina terug
1/96
Pagina verder
6
EN
4. OPERATION
Always observe the safety instructions
and appli cable regulations.
Firmly hold the machine and ferm the bit with
even pressure into the workpiece. Do not force
the machine. Use only bits that do not yet show
any signs of wear. Worn bits have a negative
effect on the efciency of the machine.
Locking the screwdriver
Fig. 8
The screwdriver is tted with an automatic spindle
lock feature. When the On/Off switch (2) is not
pressed, the spindle is locked. Now it is possible
to use the screwdriver (even when the battery is
empty) as a manual tool.
Screwdriving
Fig. 1
To switch the tool on, press the On/Off switch
(2).
Press the tumbler switch (R) for clockwise
rotation (tightening screws)
Press the tumbler switch (L) for
counterclockwise rotation (loosening screws)
To switch the tool off, release the on/off switch.
The white LED will illuminate when the tumbler
switch is pressed.
Warning! Looking straight into LED light
for a prolonged period of time from close
distance can cause damage to the eyes.
User tips for optimum use
Always hold the tool and screwdriver bit in a
straight line with the screw and always use the
correct type and size of bit.
If screws are difcult to tighten, try applying a
small amount of washing liquid or soap as a
lubricant (Fig. 9).
Use the spindle lock feature to loosen very
tight screws or to rmly tighten screws.
When screwing in wood, it is recommended to
drill a hole with a depth equal to almost the
length of the screw. A pilot hole guides the
screw and prevents splintering or distortion of
the work piece.
5. CHARGING THE BATTERY
Charging Li-Ion battery
Fig. 10
The battery charger supplied is matched to the
Li-Ion battery installed in the machine. Do not use
another battery charger.
The Li-Ion battery is protected against deep
discharging. When the battery is empty, the
machine is switched off by means of a protective
circuit: the tool holder no longer rotates. Caution:
if the On/Off switch is subject to continued use,
the Li-Ion battery can be damaged.
The charging procedure starts as soon as the
mains plug of the battery charger is inserted into
the socket and the adapter plug is connected to
the appliance (the underside of the handgrip).
Put the adapter plug of the charger into the
handle (underside)
Plug the mains adapter into the (wall) socket
The charging process starts; the red LED is
now on
The battery is fully charged when the red LED
goes out.
Charging the battery takes maximum 5 hours.
During the charging procedure, the handgrip of
the machine warms up. This is normal.
6. SERVICE & MAINTENANCE
Make sure that the machine is not live
when carrying out maintenance work on
the motor.
These machines have been designed to operate
over a long period of time with a minimum of
maintenance. Continuous satisfactory operation
depends upon proper machine care and regular
cleaning.
Cleaning
Keep the ventilation slots of the machine clean to
prevent overheating of the engine. Regularly
clean the machine housing with a soft cloth,
preferably after each use. Keep the ventilation
slots free from dust and dirt. If the dirt does not
come off use a soft cloth moistened with soapy
water. Never use solvents such as petrol, alcohol,
ammonia water, etc. These solvents may damage
the plastic parts.
6

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Ferm CDM1080 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Ferm CDM1080 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans, Pools, Turks, Deens, Zweeds, Noors, Fins als bijlage per email.

De handleiding is 2,6 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info