539081
5
Verklein
Vergroot
Pagina terug
1/56
Pagina verder
GB
5
Ferm
Loss of control can cause personal injury.
Use only impact drill bits and accessories that •
are designed for use with an impact drill when
using this machine in the impact drill mode.
Standard drill bits are NOT designed for use in
an impact drill and must NOT be used with an
impact drill. They may shatter and possibly
cause serious injury.
Do not drill material too small to be securely •
held.
Always keep hands out of the path of the drill •
bit. Avoid awkward hand positions where a
sudden slip could cause your hand to move
into the path of the drill bit.
Secure work piece. Use clamps or a vice to •
hold the work piece. It is safer than using your
hand and it frees both hands to operate the
tool.
Make sure there are no nails or foreign objects •
in the part of the work piece to be drilled.
To avoid injury from accidental starting, always •
remove the battery from the tool before
installing or removing a drill bit.
Do not install or use any drill bit that exceeds •
175 mm (7”) in lengths or extends more than
150 mm (6”) beyond the chuck jaws. They can
bend or break suddenly.
Before starting the operation, jog the switch •
shortly to make sure the drill bit does not
wobble or vibrate.
Do not use fly cutters or multiple-part hole •
cutters, as they can come apart or become
unbalanced during use.
Make sure the spindle has come to a complete •
stop before touching the chuck or attempting
to change the drill bit.
Always make sure the chuck is tight and the •
drill bit firmly tightened in the chuck before
starting the drill.
When drilling into smooth, hard surfaces such •
as metal, use a centre punch to mark the desi-
red hole location. This will prevent the drill bit
from slipping off centre as the hole is started.
Use a masonry bit with the drill in impact mode •
ONLY when drilling in concrete or masonry.
Always use carbide tipped masonry bits when •
drilling in concrete or masonry
This appliance is not intended for use by •
persons (including children) with reduced
sensory or mental capabilities, or lack of
experience and knowledge, unless they have
been given supervision or instructions
concerning use of the appliance by a person
responsible for their safety.
Children should be supervised to ensure that •
they do not play with the appliance.
Follow all safety rules and warnings,
also those which are included with the
battery pack and charger used with this
tool. Failure to do so may result in
serious injury or damage to the charger
and the battery pack
3. MOUNTING ACCESSORIES
Prior to mounting an accessory always
remove the battery.
Installing the auxiliary handle
Fig. 1+2+3
Install the auxiliary handle for two handed
operation of the drill. This is particularly important
for impact drilling in concrete. The auxiliary handle
can be installed on either the left or right side of
the Impact drill.
Insert the threaded mounting screw through •
the depth stop rod clamp (14) and into the
threaded hole in the housing.
Turn the auxiliary handle (11) clockwise to •
tighten it into the housing.
Make sure the key on the depth stop
clamp is aligned with the notch in the
drill housing. This will prevent it from
unexpected turning and the auxiliary
handle from coming loose.
Screwdriver bits and drill bits can be stored in the
auxiliary handle.
To remove the end cap (15), pull it of the auxiliary
handle. To install, push it back on the auxiliary
handle.
Installing the depth stop rod
Fig. 1+2
The depth stop rod (7) is used as a gauge to
control the depth of the drilled hole. It can be used
with the Impact drill in either the normal drilling
mode or the impact drill mode.
Turn the auxiliary handle (11) counter •
clockwise about three turns to open the depth
stop rod mounting clamp (14).
5

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Ferm CDM1079 FPCD-1800I bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Ferm CDM1079 FPCD-1800I in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans, Deens, Zweeds, Noors, Fins als bijlage per email.

De handleiding is 9,77 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info