510119
5
Verklein
Vergroot
Pagina terug
1/36
Pagina verder
EN
5
Ferm
3. Installation
The grinder must be firmly bolted to a workbench.
The length of the fixing bolts will depend on the
thickness of the workbench. If the workbench is
made of steel, it is advisable to use a wooden
block or plank between the grinder and the bench,
to insulate it and prevent vibration.
Mounting and adjustment of eye shield
bracket and eye shield
Fig. B
The eye shield bracket and eye shield
should only ever be assembled/
adjusted with the grinding wheel
stationary, and the machine
disconnected from the power supply.
• Mount the eyeshield bracket together with the
eye shield itself, by means of the screw (A).
• Adjust the height of the eyeshield bracket of
the eyeshield by loosening a bit screw . The
free space between the stone and the
eyeshield bracket of the eyeshield will amount
to 1 - 1,5 mm.
• Fasten well screw (A).
• Adjust the eyeshield in such a way that your
face will be protected, at the utmost.
• Use always safety glasses.
Adjusting tool rest
Fig. B
The tool rest should only be adjusted
when the grinding wheel is completely
statio nary, and the machine is
disconnected from the power supply
(the wall socket).
Secure the tool rest, allowing a maximum
clearance (C) between the tool rest and the
grinding stone of 1 -1.5 mm.
Replacing the grinding stone
Fig. C
Required tools:
• 19 mm Spanner
• 8 mm Spanner
• Screwdriver
Only ever replace the grinding wheel
when the motor is at a standstill and the
power is completely disconnected.
• Remove the guards, using the above tools.
When replacing the stones, remember the
right-hand spindle is fitted with right-hand
thread, the left-hand spindle with left-hand
thread.
• Loosen the nut by means of the spanner.
Remove the stone.
• Clean the flanges. Replace one flange, with
the concave side facing the grinding stone.
Slide the new grinding stone on to the spindle.
Replace the se cond flange on the spindle, with
the concave side facing the grinding stone.
Tighten the nut securely, but not too tightly!
Replace the guards and adjust the tool rest.
Let the motor run for a few seconds before you
start to grind.
4. Operation
Selecting the grinding wheel
Coarse grinding wheels will in general remove the
most material, and fine grinding wheels are used
for finishing. If the surface is uneven, begin by
using a coarse grinding wheel, and grind the
workpiece until it is smooth. Next use a fine
grinding wheel to remove the grooves and
scratching left by the coarse wheel, and finish off
the workpiece.
Grinding
The grinding machine comes with one grinding
disc for dry grinding and one for wet grinding. In
principle, the dry-grinding disc is suited for corase
grinding and the wet-grinding disc for fine grinding
where it suffices to press the workpiece lightly
against the grinding stone. This grinding machine
has been especially designed for treating and
grinding tools with cutting edges such as knives,
scissors, chisels, etc. For best results, fill the
water container with tap water.
To prevent the grinding surface from blocking up,
avoid holding wood, lead or any other soft material
or metal against the grinding wheel. To avoid
creating grooves, do not press the workpiece too
firmly on the grinding wheel. Use water to regularly
cool the workpiece being ground. Wood chisels
and the like should never be sharpened ‘blue’.
Take care not to lose your grip on the object being
ground, as it may suddenly become jammed
5

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Ferm BGM1021 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Ferm BGM1021 in de taal/talen: Nederlands, Duits, Engels, Frans, Spaans als bijlage per email.

De handleiding is 1,68 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info