Ferm 81Ferm
Features
Fig. A
1. On/off switch
2. Tool rest (Right)
3. Eye shield
4. Eye shield bracket
5. Screw
6. Tool rest (Left)
2. SAFETYINSTRUCTIONS
In this manual and/or on the machine the following symbols are used:
Read instructions carefully
In accordance with essential applicable safety standards of European directives
Denotes risk of personal injury, loss of life or damage to the tool in case of non-
observance of the instructions in this manual.
Indicates electrical shock hazard.
Immediately unplug the plug from the mains electricity in the case that the cord gets
damaged and during maintenance
Keep bystanders away
Wear ear and eye protection
Faulty and/or discarded electrical or electronic apparatus have to be collected at
the appropriate recycling locations.
Special safety instructions
When using the machine for the first time
• Check the following:
• Does the voltage rating of the bench grinder correspond to the power supply?
• Is an earthed mains power socket available?
• Are the power cord and plug in good condition (solid, without fraying or other damage)?
• Avoid the use of long extension cords. The extension cords you use must always be earthed.
• Agrinding wheel is a brittle toolpiece. The stone is not resistant to knocks.
4
UK
