510136
4
Verklein
Vergroot
Pagina terug
1/48
Pagina verder
GB
4
Ferm
3. Prevent electrical shock.
Keep the power cord away from heat, oil and
sharp edges. Avoid skin contact with exposed
parts of the power cord or plug.
4. Keep children away.
Never allow children or spectators to touch the
tools, keep them at a safe distance from the
work area.
5. Store tools in a safe place.
Tools that are not used must be stored in a dry
and locked placed, out of the reach of children.
6. Do not force the tool.
The machine will do the job better and safer
at the rate for which it was intended. Damage
caused by forcing the tool is not covered by
the warranty.
7. Use the right type of tool.
Do not use low-powered tools for heavy-duty
operations. Never use the machine other than
for its intended purpose.
8. Cable.
Never carry the tool by its cable and do not tug
at the cable to pull the plug from the socket.
Keep the cable away from heat, oil and sharp
edges.
9. Maintain the tool with care.
• The tool works best and safest if it is kept
clean.
• Observe the instructions for maintenance
and changing accessories. Keep the tool
dry and free from oil and grease.
10. Disconnect the machine.
Disconnect the machine when you do not
use it, before cleaning and when changing
accessories and tools.
11. Extension cable for outdoor use.
When working outdoors use only extension
cables suitable for this purpose and marked
as such. When using machines with earth-
connection, use an extension cable with earth-
connection.
12. Stay alert.
Watch what you are doing, use your common
sense, do not operate the tool when you
cannot concentrate on the job.
13. Check the machine for damage.
• Before starting the machine, check that all
safety devices and damaged parts
operate smoothly and efficiently;
• If not stated otherwise in this manual, da-
maged safety devices and machine parts
must be repaired or replaced by a recog-
nized service centre. Damaged switches
must be replaced by a service centre.
Do not use the machine when it cannot be
switched on or off.
Special safety instructions
In the design of the battery charger the
requirements for safe usage have been taken
into account. Any change, adaptation, conversion
or other use may interfere with the safety of the
apparatus. In addition, the guarantee will no longer
be valid because of this.
• Check the following things:
• Does the voltage of the battery charger
correspond to the mains voltage. Battery
chargers with the indication of 230 Volt
can also be used when there is a mains
voltage of 220 Volt.
• Are the mains lead and the mains plug in
good condition.
• Avoid the use of long extension cables for the
battery charger.
• Do not try to open the housing of the battery,
because dangerous substances may be
released.
• Do not use the battery charger where there is
moisture.
• Donotexposethebattery(andthecharger)to
vivid sunlight and high temperatures.
• During charging the battery acid may start to
boil, which is not unusual. Beware of
splashing, however, for battery acid is caustic.
The battery charger therefore needs to be
switched off in order to prevent accidents and
to allow the battery to cool down.
• During charging so-called detonating gas can
be liberated. That is why the filler caps are
unscrewedbeforecharging(doesnotapplyto
closed batterys, this means Battery chargers
withoutfillercaps).Charginghastotakeplace
in a thoroughly ventilated space.
• The battery charger does not stop
automatically after charging. For this reason it
needs to be switched off and disconnected
from the battery. Do not leave the battery
charger connected to the mains voltage after
the battery has been charged completely.
The apparatus needs to be switched off
completely in the case of:
• Malfunctioning or damage to the mains plug or
mains cable.
• Smoke or stench from scorched insulation.
4

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Ferm-BCM1018

Zoeken resetten

  • BCM1018 batterijlader. Zekering?
    Het apparaat doet plotseling niets. Geen lichtjes o.i.d.
    Ander (werkend) stopcontact geprobeerd. Geen reactie.
    Wat kan ik doen? Gesteld op 28-12-2020 om 16:29

    Reageer op deze vraag Misbruik melden
    • Bij mij is de acculader er ook opeens mee gestopt. Geen enkel lichtje brand en hij laad niet meer op. Je hoort wel een zachte bromtoon. Ik heb het kastje losgemaakt maar er zit geen beveiligingsschakelaar in zoals in de handleiding staat. Ik heb dit al eens eerder meegemaakt. Toen was het advies om een nieuwe te kopen. Dat is goedkoper dan opsturen voor reparatie. Geantwoord op 20-1-2021 om 08:37

      Waardeer dit antwoord Misbruik melden

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Ferm BCM1018 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Ferm BCM1018 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans, Deens, Zweeds, Noors, Fins als bijlage per email.

De handleiding is 1,37 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info