Ferm 6904 Ferm
In accordance with essential applicable safety standards of European directives
Class II machine - Double insulation - You don't need any earthed plug.
Denotes risk of personal injury, loss of life or damage to the tool in case of non-
observance of the instructions in this manual.
Indicates electrical shock hazard.
Indoor use only
Wear safety goggles
Faulty and/or discarded electrical or electronic apparatus have to be collected at
the appropriate recycling locations.
General safety instructions
1. Keep the work area clean.
• Acluttered work area may cause accidents.
• Make sure the work area is well-lit.
2. Work environment.
Never leave tools in the rain. Do not use tools in damp or wet places. Never use tools near
inflammable liquids or gasses.
3. Prevent electrical shock.
Keep the power cord away from heat, oil and sharp edges. Avoid skin contact with exposed
parts of the power cord or plug.
4. Keep children away.
Never allow children or spectators to touch the tools, keep them at a safe distance from the
work area.
5. Store tools in a safe place.
Tools that are not used must be stored in a dry and locked placed, out of the reach of
children.
6. Do not force the tool.
The machine will do the job better and safer at the rate for which it was intended. Damage
caused by forcing the tool is not covered by the warranty.
7. Use the right type of tool.
Do not use low-powered tools for heavy-duty operations. Never use the machine other
than for its intended purpose.
8. Cable.
Never carry the tool by its cable and do not tug at the cable to pull the plug from the socket.
Keep the cable away from heat, oil and sharp edges.
GB
