HearMe 200BT
IN- AND OUTPUTS
1. On/Off: Turning OFF/ON the speaker.
2. USB: MINI USB charging port (3.7 V 1500mAh).
3. AUX: Φ 3.5 stereo audio signal input interface for
external devices.
BUTTONS AND THEIR FUNCTIONS
1. Bluetooth play/pause. Press long (3 seconds) to re-
pair Bluetooth connection. Press long (5 seconds) to
switch soft.
2. Press long to increase the volume. Press short to
change to the next song (only available by an
established playlist).
3. Press long to reduce the volume. Press short to go to
the previous song ((only available by an established playlist).
BLUETOOTH PAIRING MODE
• Turn the power switch to the ON position. Bluetooth mode is set by default.
• When the red and blue lights blink alternately the Bluetooth connection can be
established.
• Turn on your cell phone’s Bluetooth function and search for Bluetooth devices. After the
search is completed, select “HearMe 200BT” from the Bluetooth device list.
• According to the indication, enter password or PIN No: “0000”. Some mobile phones do
not need input any password or PIN to pair the speaker, simply press “Pair”.
• After successful pairing, a beep sound will be played and the blue light starts blinking
slowly.
• When the Bluetooth connection can not be established meanwhile 3 minutes, the
speaker turns automatically into standby mode.
• For pairing again, press long the button Bluetooth for 5 seconds. The speaker will go
into the pairing state again.
5
