442944
5
Verklein
Vergroot
Pagina terug
1/28
Pagina verder
www.fender.com
5
www.mrgearhead.net
R. POWER - Switches power ON and OFF to the
amplifier. (Reduce the “shock” to amplifier tubes at
power-up, extending their life span, by turning the
amp ON with the STAND BY switch DOWN for the
first minute, then UP for normal use.
S. STAND BY - In the DOWN position, this switch puts
the amp on stand by. Audio is muted and power is
supplied only to the tube filaments. Use STAND BY
in place of switching POWER OFF during short
breaks (one hour max.). This eliminates the normal
warm-up time when STAND BY is switched OFF (UP)
when returning to play the amplifier and also extends
the life span of your amplifier’s tubes.
T. IEC LINE CORD CONNECTO R - Connect the
supplied IEC POWER LINE CORD to a grounded AC
receptacle in accordance with the voltage and fre q u e n c y
ratings as shown on the rear panel of the amplifier.
U. FUSE - Power Mains fuse, protects the amplifier
from electrical faults. Replace a failed fuse only with
the proper type and rating (See FUSE F200 under
“Specifications”). If a fuse repeatedly fails, consult
an authorized Fender service technician.
V. OUTPUT POWER - Selects amplifier output power:
FULL (50 watts), or
1/4 (12.5 watts).
Note: See “Effects Loop Settings” on the next page for
details on the use of items (W—AA).
W. SEND - Controls the SEND jack output level.
X. SEND JACK - Output jack for connection to the
input jack of effects devices in an effects loop.
Y. LOOP - This two position button engages/bypasses
the effects loop:
button OUT > to BYPASS the effects loop
button IN > to ENGAGE the effects loop
*Note: When the Footswitch is plugged into the
FOOTSWITCH jack, effects LOOP BYPASS/ENGAGE
are possible only from the Footswitch.
Z. RETURN JACK - Input jack for connection to the
output jack of an effects device in an effects loop.
AA. RETURN - Controls the RETURN jack input level
going into the power amp.
BB. PRE AMP OUT JACK - This output jack supplies
an unbalanced, line-level signal (with Reverb) to a
re c o rding/sound re i n f o rcement console, or to an
external power amplifier such as another Pro-Tube
amplifier used as an extension amp.
CC. POWER AMP IN - This input jack connects directly
to the power amplifier, automatically disconnecting
the preamp signal from the circuit. When using your
Pro-Tube as an extension amp, connect the PRE-
AMP OUT jack on another Pro-Tube amp, to this
jack. Control both units from the source amplifier.
DD. F O OT S W I TC H JACK - Connect the supplied
4–button Footswitch at this jack to enable these
Footswitching functions:
SELECT Pre-Amp Channel*
BYPASS/ENGAGE the Effects Loop*
Switch Tremolo ON/OFF
Switch Reverb ON/OFF
*Note: When the Footswitch is plugged into the
FOOTSWITCH jack, CHANNEL SELECTION and
effects LOOP BYPASS/ENGAGE are possible only from
the Footswitch.
EE.—JJ. (See “Tube Adjustment” on the next page.)
KK. EXTERNAL SPEAKER JACK -
Connect an 8 ohm
external speaker cabinet at this jack only if another
8 ohm speaker load is connected at the M A I N
SPEAKER jack (see MAIN SPEAKER jack and “Speaker
Connection Guide” below).
Note: When a plug is inserted in the EXTERNAL
SPEAKER jack, the amplifier is automatically switched
to handle a 4 ohm speaker load.
LL. MAIN SPEAKER JACK - Keep the intern a l
speakers connected at this jack for normal amplifier
operation (8 ohm load).
I M P O R TA N T !: SPEAKERS MUST ALWAYS BE
CONNECTED AT THE MAIN SPEAKER JACK WHEN
THE AMPLIFIER IS SWITCHED ON TO PREVENT
SERIOUS DAMAGE TO THE AMPLIFIER!
Speaker Connection Guide
Connect speakers to MAIN SPKR and EXT SPKR jacks using
these configurations:
M A I N EXTERNAL P R O P E R
SPEAKER
J A C K
1
SPEAKER
J A C K L O A D
I n t e rnal 8 ohm + N O N E = 8 ohms
E x t e rnal 8 ohm + N O N E = 8 ohms
I n t e rnal 8 ohm + E x t e r nal 8 ohm = 4 ohms
2
E x t e rnal 8 ohm + E x t e r nal 8 ohm = 4 ohms
2
1
2
Note: When a plug is inserted in the EXTERNAL
SPEAKER jack, the amplifier is automatically switched to
handle a 4 ohm speaker load.
F
F
e
e
n
n
d
d
e
e
r
r
®
®
P
P
r
r
o
o
-
-
T
T
u
u
b
b
e
e
S
S
e
e
r
r
i
i
e
e
s
s
5

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Fender Pro bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Fender Pro in de taal/talen: Engels als bijlage per email.

De handleiding is 3,26 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info